Slag Cement Ball Mill Machine Grinding Ball Mill Fine Powder For
Mining
Introduction for ball mill:
TONTEN machinery grinding ball mill consists of the feeding part,
discharging part, rotating part, transmission part and other main
parts. The hollow shaft is made of cast steel, the inner lining is
removable, the rotating gear is made of cast gear hobbing, and the
cylinder is inlaid with wear-resistant lining, which has good wear
resistance. According to the material and the discharge method, dry
ball mill and wet grid ball mill can be selected. The working
principle of the ball mill is to grind the material into the
required fine powder through friction and impact. The ball mill is
mainly used in non-ferrous metals, ore dressing, ceramics,
chemicals, cement, glass, refractory materials, fertilizers and
other industries. The ball mill is divided into dry and wet types.
The dry type is used in refractory materials, cement, fertilizers,
and glass industries; the wet type is used in ore dressing,
ceramics, and chemical industries.
Main features of ball mill:
1. High production efficiency: small unit equipment footprint and
strong production capacity. Can work continuously with high
production efficiency
2. Controllable discharging particle size: products of different
particle sizes can be obtained by adjusting parameters such as
rotation speed, ball-to-material ratio, overflow time, etc. Meet
different fineness requirements.
3. Simple structure: The ball mill consists of three parts: the
body, grinding balls and drive device. It has a compact structure
and is easy to maintain.
4.Suitable for grinding materials of different properties such as
hardness, brittleness, wetness, etc. It can be used in chemical,
metallurgical, building materials and other industries.
Parameters:
| Model | Cylinder speed
(r/min) | Ball load weight(t) | Feeding size(mm) | Discharging size(mm) | Capacity(t/h) | Power(kw) | Weght(t) |
| BM900x1800 | 36-38 | 1.5 | ≤20 | 0.075-0.89 | 0.65-2.5 | 18.5 | 5.8 |
| BM900x3000 | 36 | 2.7 | ≤20 | 0.075-0.89 | 1.1-3.5 | 22 | 6.95 |
| BM1200x2400 | 36 | 3 | ≤25 | 0.075-0.6 | 1.5-4.8 | 30 | 13.56 |
| BM1200x3000 | 36 | 3.5 | ≤25 | 0.074-0.4 | 1.6-5 | 37 | 14.31 |
| BM1200x4500 | 32.4 | 5.2 | ≤25 | 0.074-0.4 | 1.6-5.8 | 55 | 15.6 |
| BM1500x3000 | 29.7 | 7.5 | ≤25 | 0.074-0.4 | 2-5 | 75 | 19.5 |
| BM1500x4500 | 27 | 11 | ≤25 | 0.074-0.4 | 3-6 | 110 | 22.1 |
| BM1500x5700 | 28 | 12 | ≤25 | 0.074-0.4 | 3.5-6 | 130 | 25.8 |
| BM1830x3000 | 25.4 | 11 | ≤25 | 0.074-0.4 | 4-10 | 130 | 34.5 |
| BM1830x4500 | 25.4 | 15 | ≤25 | 0.074-0.4 | 4.5-12 | 155 | 38 |
| BM1830x6400 | 24.1 | 21 | ≤25 | 0.074-0.4 | 6.5-15 | 210 | 43 |
| BM1830x7000 | 24.1 | 23 | ≤25 | 0.074-0.4 | 7.5-17 | 245 | 43.8 |
| BM2100x3000 | 23.7 | 15 | ≤25 | 0.074-0.4 | 6.5-36 | 155 | 45 |
Ball mill:
