New Design Chip Mounter Nozzle Cleaner SMT Cleaning Equipment For
Nozzle Cleaning And Drying
Introduce
The nozzle cleaning machine is a cleaning equipment that replaces
the traditional use of steel needles or ultrasonic vibration to
clean the nozzles. The dirt on the suction nozzle that could not be
removed before can be removed in a short time. And the nozzle will
not be damaged during the cleaning process. Since it uses non-toxic
and harmless cleaning fluid, the whole process is more
environmentally friendly.
Automatic Nozzle Cleaning System. With the development of SMT,
miniaturization and high-density mounting of components have become
a trend. Subsequently, the nozzle of the SMT placement machine is
more precise and has a greater impact on placement quality. During
the actual mounting process, the nozzle is clogged due to
contamination of solder, flux or other contaminants, which can
easily cause material to be thrown away. Previously, we could no
longer solve the problem by poking with steel needles or using
ultrasonic shock.
The nozzle cleaning machine developed for this situation uses a new
cleaning method, which can remove dirt on the nozzles that could
not be removed in a short time. And the nozzle will not be damaged
during cleaning. Since non-toxic and harmless cleaning fluid is
used, the whole process is more environmentally friendly.
Efficient vacuum cleaning
Adopt powerful vacuum device with rotating brush
Can quickly and effectively remove pollutants such as tin slag and
dust accumulated on the surface of the nozzle
Ensure the nozzle is in the best condition and improve the accuracy
of patching
Fully automated operation
The entire cleaning process is fully automated
Set cleaning parameters through computer control system
Improve work efficiency and reduce labor costs
Intelligent detection
Equipped with high-precision sensors
Real-time monitoring of nozzle status, automatic judgment of
cleaning needs
Intelligent control of cleaning frequency to maximize equipment
utilization
Pollution-free and environmentally friendly
Adopt closed studio design
Use harmless clean gas, will not cause any damage to the patch
machine
The whole process is green and environmentally friendly, in line
with relevant safety standards
High applicability
Compatible with various types of patch machine nozzles
Cleaning speed can handle 10-20 nozzles each time
Widely used in SMT production lines
Easy to maintain and integrate
Modular design for easy daily maintenance and replacement of
consumables
Can be integrated with production management system to achieve
remote monitoring and parameter setting
Specification
| Model | HS-801 |
|---|
| Usage | Cleaing dirty on the nozzles |
|---|
| Cleaning objects | Nozzles from all the chip mounter |
|---|
| Air pressure | 0.5~0.6Mpa |
|---|
| Air source | Pure compressor air |
|---|
| Control mode | Touch Screen |
|---|
| Jet pressure | ≤0.4MPa |
|---|
| Air wastage | Under 280NL/min |
|---|
| Water source | D.I water |
|---|
| Water storage | 800cc |
|---|
| Water consumption | 300cc/hrs |
|---|
| Admission pipe/Drainpipe | φ8/φ6 |
|---|
| Nozzle tray | Default 30 nozzles |
|---|
| Nozzle size | 0201-2512inch |
|---|
| Noise | 35-60dB |
|---|
