Fire Suppression Agent System For Kitchen For Restaurant Fire Protection

Fire Suppression Agent System For Kitchen For Restaurant Fire Protection

Description of Kitchen Fire Suprresion System

Activation Method:

1. Automatic Activation Method:

1.1 Thermal Detection: When a fire occurs in the kitchen oil pot, the heat generated by the flames will cause the temperature inside the hood to rise. When the temperature reaches the preset thermal threshold of the fire suppression system (usually 183°C to 185°C), the thermal detector will automatically disconnect, triggering the fire suppression system to activate automatically.

1.2 Release of Fire Extinguishing Agent: Once the fire suppression system is activated, it will release fire extinguishing agents (such as dry powder, water-based agents, etc.) through atomizing nozzles, spraying them onto the oil pot and inside the hood. These agents will either chemically react with the burning oil or physically isolate it, forming a covering layer to cut off the air supply and extinguish the flames.

1.3 Cooling Down: After the fire suppression system sprays the extinguishing agent, it typically activates a water flow valve automatically, spraying water onto the oil pot and exhaust hood to cool them down and prevent re-ignition. The cooling water is sprayed for about two minutes before the system automatically shuts off the water.

2. Manual Activation Method

2.1 Fire Detection: In the early stages of a fire or if the automatic activation system fails, on-site personnel can manually activate the fire suppression system.

2.2 Operating the Manual Activation Device: Follow the instructions on the device to remove the safety pin, pull out the ring, or press the button, causing the drive valve to activate and release the fire extinguishing agent from the high-pressure cylinder.

2.3 Observing the Extinguishing Effect: After manually activating the fire suppression system, observe whether the fire source is completely extinguished and take necessary follow-up measures.

3. Mechanical Emergency Activation Method

3.1 Confirming Automatic and Manual Activation Failure: When both automatic and manual activation methods fail to start the device normally, the mechanical emergency activation method can be used.

3.2 Operating the Mechanical Drive Valve: Manually operate the drive valve handle to open the mechanical drive valve, releasing the fire extinguishing agent to extinguish the fire.

*** Components of Kitchen Fire Suprresion System

*** Working principle of kitchen Fire Suprresion System

The working principle of kitchen fire suppression typically involves three key mechanisms:

Oxygen Deprivation (Smothering):
Kitchen fires, especially grease or oil fires (Class F), require oxygen to sustain combustion. Fire extinguishers or suppression systems release agents (e.g., wet chemicals, foam, or carbon dioxide) to displace oxygen around the flames. For example, a fire blanket physically blocks oxygen, while CO₂ gas forms an inert layer over burning oil.

Temperature Reduction (Cooling):
Agents like water (in automatic sprinklers) or wet chemical solutions absorb heat energy, lowering the fuel temperature below its ignition point. Water mist systems are particularly effective as they rapidly cool flames and surrounding surfaces without spreading grease.

Chemical Chain Reaction Interruption:
Dry chemical extinguishers (e.g., ABC powder) or specialized wet chemicals disrupt the combustion process at a molecular level. For grease fires, wet agents (potassium acetate/citrate) create a soap-like layer (saponification) that seals the fuel surface, preventing re-ignition.

*** Advantage of Kitchen Fire Suprresion System

-- Rapid Response

-- Automated Operation

-- Effective Cooling and Re-ignition Prevention

-- Environmentally Friendly and Safe

-- Wide Applicability

-- Self-Diagnostic Function

Application of Kitchen Fire Suprresion System

Kitchen Equipment Fire Suppression Device is mainly used at the following site: hotel, restaurant kitchen, the catering center of the stadium, large/medium/small restaurant, fast food restaurant, the catering center of the airport, the kitchen of the office and hospital, large office building restaurant, the kitchen of industrial and mining enterprises, college canteen and so on.

Packages of Kitchen Fire Suprresion System

We pack products with first polyfoam and then the wooden cases. Once products are too big or customers require a pallet for products, we will make products a pallet. The following pictures are the common packing of products:

Introduction:

Guangdong Air Giant Fire Equipment Co., Ltd. is an enterprise integrating research and development, design, manufacturing and marketing services, which is specialized in the production of HFC-227ea (pipe network type, piston flow type, cabinet type, hanging type, server-rack fire suppression unit) fire extinguishing device, IG series fire extinguishing system, automatic pressure relief device, fire trace tube, automatic fire suppression tube and so on, and these products have passed the inspection of the National Quality Supervision and Inspection Center for Fixed Fire Extinguishing Systems and Fire-resisting Components.

Location:

Guangdong Air Giant Fire Equipment Co., Ltd. has a subsidiary called Guangzhou Zibda Trade Co.,Ltd. This two companies locate in different places. Guangdong Air Giant Fire Equipment Co., Ltd. sets itself at Factory 101, Building 2, No. 2, Shaxing Road, Lanhe Town, Nansha District, Guangzhou and its subsidiary locates at No. 2-2, Shaxing Road, Shajiao Village, Lanhe Town, Nansha District, Guangzhou City.

Factory Overview:

The company's office and factory are located in the same location, with the first floor for factory use, mainly used for the production of fire extinguishing equipment and product storage. The second floor is for office use. The factory has a high-quality production team, professional design team, and advanced production equipment, which can produce high-quality and high-performance fire extinguishing equipment and fire prevention equipment, providing comprehensive solutions and high-quality after-sales service for users. In the future, the factory will continue to adhere to the concept of "high quality, high performance, and high service", continuously innovate and expand the market, provide customers with more comprehensive and high-quality fire prevention equipment and services, and contribute its own strength to the safe development of society.

• Factory appearance display

• Bottle storage room

• Cylinder cleaning and pressure testing room

• Agent filling room

• Accessories testing room

• Accessories warehouse

• Product shipment

Products:

Our company's main products are the fm200 series. At the same time, we also sell other fire-fighting equipment, such as gas mask, fire rolling shutters, etc.

The FM200 fire extinguishing series is divided into three types. They are pipe network type fm200 fire extinguishing system, cabinet type fm200 fire extinguishing system, and suspended type fm200 fire extinguishing system. This type of product has been widely recognized as the best substitute for the Halon series.

In addition, our company also has IG series products, such as IG100, IG541, and IG55. These inert gases are environmentally friendly, green, and highly safe.

Main Markets:

Our target customers are countries all over the world that need fire suppression systems. At present, our main markets are located in African and Asian countries and some European countries. Our products have a certain influence in Vietnam and Myanmar and are recognized by local customers. In the future, we will continue to open up markets all over the world to allow more places to recognize our products.