10/100/1000Mbps 24V 24W POE Injector with Power Cord
Product Advantages
► Output Voltage: 24VDC @ 0.5A
► Storage Temperature: -20C to +70 deg C
► Operating Humidity: 5% to 95% non-condensing
► Input Voltage: 90-260VAC @ 47-63Hz
► Input Current: 0.3A @ 120VAC, 0.2A @230VAC
► Efficiency: 70+%
► Output Ripple: 1% Max
► Switching Frequency: 200kHz
► Line Regulation: +/- 0.5%
► Load Regulation: +/- 1%
► Operating Temperature: -10C to +50 deg C
► Remotely power Equipment Through CAT 5/6 Cable up to 100m (328ft).
► Short Circuit, Over Current and Over Voltage Protection.
Overview
LNK-PSE2424G 24W – 24V Gigabit PoE Injector is a long-distance driving, fast network
performing, strong PoE Output midspan. It is a single port indoor
PoE injector that can provide up to 24W.
The midspans are ideal to power 802.11 access points, pan-tilt-zoom
(PTZ) and dome cameras, IP videophones, thin clients and other
power Ethernet end terminals with 24W of power. With plug and-play
installation, they are easy and cost effective to implement
leveraging existing Ethernet infrastructure while at the same time
providing the assurance of a future proof network.
Technical Indexes
Ethernet |
Standards: | IEEE 802.3 10Base-T Ethernet |
IEEE 802.3u 100Base-TX Fast Ethernet |
IEEE 802.3ab 1000Base-T Gigabit Ethernet |
Processing Type: | Forward |
Half-duplex, Full-duplex |
Forward Filter Rate: | 1,488,000pps (1000Mbps) |
Cabling: | 10/100/1000Base-T: Cat5 or above |
Maximum Distance: | PoE (24W): 2-pair UTP Cat. 3, 4, 5, up to 100m (328ft) |
Connector: | LAN: 1 x RJ-45 STP, “Data” Input Port POE: 1 x RJ-45 STP, “Data + Power” Output Port AC Connector: 1 x AC Input power socket, IEC-60320-C15 |
Environmental |
Operating Temperature: | -10°C to 50°C (14°F to 122°F) |
Storage Temperature: | -20°C to 70°C (-4°F to 158°F) |
Relative Humidity: | 5% to 95% non-condensing |
MTBF: | >200,000hrs |
Electrical and Mechanical |
Input Voltage Range: | 90-260VAC @ 47-63Hz. |
Output Voltage: | DC 24V |
Power Consumption: | 24 watts max. |
PoE (Power over Ethernet) |
Port: | RJ45 |
Power Pin Assignment | Data provide over pairs 1/2(+) and 3/6(-) Power over spare pairs 4/5(+) and 7/8(-) |
PoE Power Output | DC 24V/24-watt PoE via 2-pairs |
LED Indicators |
Power: | Power Status |
PoE: | PoE Status |
Dimensions (W×D×H): | 84 x 43 x 31mm |
Weight: | 0.25Kg |
Casing: | Plastic Case |
Mounting Options: | Desktop |
Regulatory Approvals |
ISO9001 |
Ordering Information
Model | Description |
LNK-PSE2424G | 10/100/1000Mbps 24V 24W POE Injector with Power Cord |
