One-Handed Operation PP Plastic Airless Pump Bottles Household
Daily Use Custom Label
♦Product Description:
Our one-handed operation PP plastic airless pump bottles are
designed for seamless household daily use. The intuitive one-handed
design lets you dispense with ease—perfect for busy mornings or
multitasking moments, whether in the bathroom, kitchen, or utility
area. Crafted from durable PP plastic, these bottles feature an
airless pump that minimizes air exposure, keeping contents fresh
and preventing contamination, ideal for lotions, creams, or other
daily essentials. Plus, customize with your preferred label to
match your space or brand, blending practicality with
personalization. A smart, user-centric addition to your daily
routine.
♦Product Specification:
A. Primary Specification Properties
1. Material
| MATERIAL | MATERIAL DESIGNATION NAME | ALTERNATE MATERIALS |
| Base Material | Dispenser: 1. Spring: TPE 2. Piston: PE 3. Others: PP | N/A |
| Masterbatch | Standard white or customization | N/A |
2. Dimensional Requirements
1. General
1.1 Inspection condition Lighter: D65 Distance: 30CM visual
| Item | Description | Specification |
| 1 | Overall Height | 75ml | 150.0±0.80mm |
|
| 100ml | 183.0±0.80mm |
| 2 | Weight of dispenser (without Piston) | 75ml | 36.8g±2.0g |
|
| 100ml | 40.5g±2.0g |
| 3 | Weight of piston | 2.8g±0.2g |
| 4 | Over cap diameter | 39.60±0.40mm |
| 5 | Inner diameter of body | 37.60±0.15mm |
| 6 | Upper diameter of piston | 37.95±0.15mm |
| 7 | Weight of labels | TBD |
| 8 | Weight of sleeves | TBD |
Weight is excluding the sealing foil on the body |
1.2 Drawing
B. Additional requirements
1.2 Must be free of dirt, grease, oils, or other foreign materials.
1.3 Parts must be free of flash, short shots, sink or other
imperfections that may affect functionality of the part or has
potential to cause injury.
2. Function test
2.1 Vacuum leakage test
After filling with toothpaste, put the finish part with holding
pressure u-0.03MPa, 10 minutes". The result is ok if there is no leakage
2.2 Drop test
After filling with toothpaste, free drop from height 0.5M. The
result is ok if there is no crack on the body.
3. Decoration
- Shrinking sleeves inspection
- Ensure the color and artwork consistent with customer sample.
2) Printing color tolerance: AEab* M3.5
- Ensure the color and artwork consistent with customer sample.
2) Printing color tolerance: AEab* <3.5
C. Markings
- Mark each pallet clearly on the top and at least two sides with the
following minimum information:
a.Supplier's name and address
b. Quantity
c. Manufacturing date
d. Lot number
e. Order numbe
Or use the customization mark according to Customer
D. Storage
The products must be stored upon receipt from the supplier within
the original closed container, in a clean dry, well-aired store,
away from direct sunlight, humidity and sources of contamination or
foreign door and insect.
E. Certificate of Analysis
•Manufactured date, lot number, quantity , materials
•Includes measured visual inspection, key function test, and
critical dimension measurement result.
♦FAQ:
Q1: Why is an Airless Toothpaste Pump better than a regular
toothpaste tube?
Unlike tubes that let air in as you squeeze, our airless pump uses
vacuum technology. This creats a completely airtight seal,
prvventing air, bacteria and contaminats from touching your
toothpaste. This keeps your paste fresher, more hygienic, and
maintains its original texture and effectiveness until the very
last drop.
Q2: How does an airless toothpaste pump work?
