CPLD 40K Programmable Logic Device Chip GW2A-LV18PG256C8/I7

PBGA-256 CPLD/FPGA Programmable Logic Device Chip GW2A-LV18PG256C8/I7

When using the GW2A/GW2AR series FPGA products for circuit board design, users should follow a series of rules. This manual describes the features and special functions of the GW2A/GW2AR series FPGA products and provides a comprehensive checklist to guide the design process. The main contents of this guide are as follows: <s:1> Power supply <e:1> JTAG download <e:1> MSPI download <s:1> clock pin <e:1> differential pin <e:1> READY, RECONFIG_N DONE <s:1> mode <e:1> JTAGSEL_N <e:1> FASTRD_N <s:1> EXTR <e:1> pin multiplexing <s:1> external crystal oscillator circuit reference <s:1> GW2AR Bank voltage <e:1> supported configuration mode

The youdaoplaceholder0 pin allocation

Power supply

1. Overview

The voltage types of the GW2A/GW2AR series FPGA products include

Core voltage (VCC),PLL voltage (VCCPLL), auxiliary voltage (VCCX), and Bank

Voltage (VCCIO).

VCCX is an auxiliary power supply used to connect the internal parts of the chip and is usually powered by a 2.5V or 3.3V power supply. If VCCX does not exist,I/O,OSC and BSRAM circuits will be affected and the chip will not function properly.

2. Power index

Users should ensure that GOWINSEMI products are always available

www.gowinsemi.com

1 (14)

Use within the range

Schematic Manual of GW2A/GW2AR Series FPGA Products

UG206-1.1 E

Recommended working conditions and scope. The data exceeds the work.

The conditions and scope are for reference only. GOWINSEMI does not guarantee that all equipment is in compliance with standards

Operate as expected beyond the working conditions and scope.

For specific densities, encapsulation and resource utilization, the GPA tool can

Used for evaluating and analyzing power consumption.

4. Power-on time

Reference range for power-on time :0.2 milliseconds to 2 milliseconds.

Attention!

Youdaoplaceholder7 If the power-on time exceeds 2 milliseconds, you need to make sure that in

In the sequential power-on process, it starts with VCC, followed by VCCX/VCCIO.

If the power-on time is less than 0.2 milliseconds, it is recommended to increase it

Capacitors are used to extend the power-on time.

5. Power filter

Each FPGA power input pin passes through a 0.1uF

The ceramic capacitor is connected to ground.

The input terminal of the VCC core voltage should mainly be carried out

Noise processing. For specific reference, please refer to Figure 1:

Figure 1 Noise processing at the core voltage input terminal of VCC

V1P0

FB

VCC

C

4.7 uF

GW2A/GW2AR series FPGA products isolation and filtering VCCPLL.

For specific reference, please refer to Figure 2

www.gowinsemi.com

2 (14)

Schematic Manual of GW2A/GW2AR Series FPGA Products

UG206-1.1 E

Figure 2 Isolation and Filtering of VCCPLL

FB is a magnetic bead, reference model mh2029-221Y, with ceramic capacitors of 4.7uF,100nF and 10nF. It offers more than

Accuracy of ±10%.

Download JTAG

1. Overview

JTAG download is used to download bitstream data to

SRAM, FPGA with on-chip flash or off-chip flash.

2. Signal Definition

Table 3 Signal Definitions of JTAG Configuration Mode

Name I/O description

Serial clock input in TCK I JTAG mode

TMS I is weak internally

Serial mode input in pull-up JTAG mode

TDI I, weak internally

Serial data input in pull-up JTAG mode

Serial data output in TDO O JTAG mode

3. JTAG Circuit Reference

Figure 3 Reference for the JTAG circuit

Attention!

The resistance accuracy shall not be less than 5%.

The power supply at pin 6 of the youdaoplaceholder1 JTAG socket can be adjusted to VCC1P2.

VCC1P5,VCC1P8 and VCC2P5, adjusted as needed.

Packaging and transportation instructions

- According to the standard export packaging.

Customers can choose from cartons, wooden cases and wooden pallets according to their own requirements.

Q&A

1. How to obtain the price?

We usually quote within 24 hours after receiving your inquiry (except weekends and holidays). If you are in urgent need of a price, please send us an email or contact us in any other way so that we can provide you with a quotation.

2. What is your delivery time?

This depends on the quantity of the order and the season in which you place the order. Usually, we can ship the goods within 7 to 15 days (for small batches), and for large batches, it takes about 30 days.

3. What are your payment terms?

Factory price, 30% deposit, 70%T/T payment before shipment.

4. What is the mode of transportation?

It can be transported by sea, air or express delivery (EMS, UPS, DHL, TNT, FEDEX, etc.). Please confirm with us before placing an order.

5. How do you help our business establish a long-term and good relationship?

We maintain good quality and competitive prices to ensure that our customers benefit.

2. We respect every customer as our friend. We do business with them sincerely and make friends with them, no matter where they come from.