12~48VDC Power Input Industrial 2-Port Gigabit PoE+ Injector
Model:LNK-INJ302
Overview
The LNK-INJ302 product is a Hardened 2 ports Gigabit High Power PoE
Injector allows
you to connect the IEEE 802.3 af/at PoE device such as camera and
access point with
a non PoE LAN switch within the distance of 100m.
Both the Ethernet port (to switch) and the PoE Out port (to PoE
device) support 10/100/1000
Base-T and are compliant with IEEE 802.3ab. The PoE Out port is
also compliant with IEEE
802.3 at.
LNK-INJ302 provides an integrated power solution with a wide range
voltage of 12~48VDC
for high availability applications.
Features
► 12~48VDC Power Input
► Support 10/100/1000Base-TX
► Support DIN-Rail & Wall-mount installation.
► Max 60W PoE at one port, total POE power less than 60W
► Extensive LED indicators for PoE diagnostics
► Support IEEE802.3at Power over Ethernet (PoE+) Power Sourcing
Equipment
►2 RJ45 Ethernet Data Input Port + 2 RJ45 Power Over Ethernet
Output Port (Data + Power)
► Environmentally Hardened -40°C to 80°C (-40°F to 176°F) operating
temperature
Technical Indexes
| Ethernet |
| Standards: | IEEE802.3af Power over Ethernet |
| IEEE802.3at Power over Ethernet |
| Processing Type: | Forward |
| Half-duplex, Full-duplex |
| Forward Filter Rate: | 1,488,000pps (1000Mbps) |
| Cabling: | 10/100/1000Base-T: Cat5 or above |
| Maximum Distance: | Cat5 UTP up to 100m |
| Connector: | 4x RJ45 |
| Environmental |
| Operating Temperature: | -40°C to 80°C (-40°F to 176°F) |
| Storage Temperature: | -40°C to 85°C (-40°F to 185°F) |
| Relative Humidity: | 5% to 95% non-condensing |
| MTBF: | >200,000hrs |
| Electrical and Mechanical |
| Input Power: | 12~48VDC (Terminal Block) |
| Power Consumption: | 70W Max. |
| PoE (Power over Ethernet) |
| Standard: | IEEE802.3af/at |
| Port: | RJ45 |
| Power Pin Assignment | 4/5(+), 7/8(-) |
| Max. Power per Port: | 60W Max (Alternative B Mode) |
| LED Indicators: |
| Power: | Power Status |
| PoE: | PoE Status |
| Dimensions (WxDxH): | 95 x 70 x 30 mm |
| Weight: | 0.26Kg |
| Casing: | Aluminum Case |
| Mounting Options: | DIN-Rail / Wall-mount |
| Regulatory Approvals |
| ISO9001 |
| FCC part 15, Class A |
| CE-EN55022:2006+A1: 2007 Class A |
| Surge Protection: |
| RJ45: 1KV |
| Power: 500W |
| ESD: 4KV/8KV |
Application
- IP Cameras: Provides PoE power and data transmission for surveillance
systems.
- Access Points: Supplies power to wireless access points in non-PoE networks.
- VoIP Phones: Ideal for powering IP phones in office environments.
- Remote Devices: Perfect for remote PoE devices in industrial and commercial
settings.
Order Information
| Model | Description |
| LNK-INJ302 | 12~48VDC Power Input Industrial 2 ports Gigabit PoE+ Injector |
| Mounting Options | ► Default DIN-Rail Bracket installed; Wall Mount Bracket is
included. |
| Power Options | ► Power Supply is to be purchased separately |
