SH407B X-ray Fluorescence Sulfur Analyzer
The SH407B X-ray fluorescence sulfur analyzer adopts the principle
of energy dispersion and is designed with an integrated mechanical
and electrical microcomputer for fast and accurate analysis. Its
repeatability and reproducibility meet the relevant requirements of
the national standards GB/T 17040-2008 "Determination of Sulfur
Content in Petroleum Products (Energy Dispersive X-ray Fluorescence
Spectroscopy)" and GB/T 11140-1989 "Determination of Sulfur Content
in Petroleum Products (X-ray Spectroscopy)" GB/T17606 Determination
of Sulfur Content in Crude Oil by Energy Dispersive X-ray
Fluorescence Spectroscopy, and fully comply with the requirements
of the American National Standard ASTMD4294-02.
The SH407B fluorescence sulfur analyzer mainly measures the total
sulfur mass percentage content of crude oil, petroleum, heavy oil,
diesel, kerosene, gasoline, and naphtha. It can also measure the
total sulfur or sulfur compound content in coal chemical products
(such as primary benzene) and other liquid samples; It can also be
used to determine the total sulfur or SO3 content in fine powder
samples, etc Complies with GB/T17606.
Main technical features
● Adopting imported SDD detectors with a resolution of less than
125eV and a maximum counting rate of 2000kcps;
● 30W micro focal spot thin beryllium window X-ray tube;
● WISMAN 30W X-ray tube precision high-voltage power supply;
● 8-inch wide viewing angle capacitive touch screen (1024 * 768)
display, backlight brightness can be set through software
● Wide variety of detection, wide detection range, fast analysis
speed, no need for chemical reagents;
● Using fluorescence intensity ratio analysis method, temperature
and air pressure are automatically corrected;
● The automatic diagnostic function of the instrument determines
its working status and electrical parameters;
● Closed directional air-cooled heat dissipation ensures stable
operating temperature of X-ray tubes and extends their service
life;
● Optimize the optical path design to further enhance the
reliability of software and hardware;
● Large data storage capacity, convenient for users to read data;
● The X-ray shielding design, polymer materials, and safety linkage
devices effectively ensure radiation safety.
● The instrument has a large data storage capacity, with 4096
content analysis results, 8192 counting measurement data, and 16
instrument calibration result data
Main technical parameters and indicators:
| Measurement range | Sulfur 0.0005% ～ 5% (5ppm-50000ppm) |
| Measurement time | 120 ～ 240s |
| Repeatability (r) | <0.4347X0.6446 (X=average of two repeated test results) |
| Reproducibility (R) | <1.9182X0.6446 (X=average of two single, independent test results) |
| Sample size | 5ml ～ 6ml |
| Work environment | Temperature: 10-30 ℃ Relative humidity: ≤ 85% (30 ℃) |
| Working power supply | AC100-220V/50Hz |
| Rated power | ≤ 50W |
| Instrument size | 460 * 260 * 265mm |
| Instrument weight | 9.25kg |
| Packaging size | 340 * 545 * 345 mm |
| Packaging weight | 11kg cardboard box |
| Standard accessory packaging | 55 * 13.5 * 33.5 |
| Weight of standard accessories | 3kg |
● Measurement range: Sulfur 0.0005% ～ 5% (5ppm ～ 50000ppm)
● Measurement time: 120 ～ 240s
● Single sample automatic measurement, measurement repetition
times: 1, 2, 3 can be set arbitrarily, and the average value and
standard deviation will be given at the end of the measurement
● Repeatability (r):<0.4347X0.6446 (X=average of two repeated
test results)
● Reproducibility (R):<1.9182X0.6446 (X=average of two single,
independent test results)
● Sample size: 5ml ～ 6ml
● The instrument can store 10 calibration curves
● Work environment:
Temperature: 10-30 ℃
Relative humidity: ≤ 85% (30 ℃)
● Working power supply: AC100-220V/50Hz
● Rated power: ≤ 50W
● Instrument size: 460 * 260 * 265mm
● Instrument weight: 9.25kg
● Packaging size: 340 * 545 * 345 mm
● Packaging weight: 11kg cardboard box
● Standard accessory packaging: 55 * 13.5 * 33.5
● Weight of standard accessories: 3kg
Note: The appearance pictures, dimensions, volume, and weight of the
instrument are for reference only. If there are any updates to the
instrument, there may be slight changes without prior notice.
Shandong Shengtai Instrument Co., Ltd. provides the following
quality assurance for the instruments sold to you:
----The provided instrument materials are brand new, meet national
quality standards, and have a manufacturer's certificate of
conformity;
----The materials and main components provided meet the technical
requirements specified in the technical documentation;
----The overall quality assurance period of the equipment is one
year (excluding normal wear and tear of vulnerable parts).
----We are responsible for free maintenance of any instrument
quality issues that occur during the warranty period. Due to
equipment malfunction caused by the user's responsibility, we are
responsible for repairing and charging reasonable fees.
----Lifetime discounted supply of parts for equipment, and lifetime
maintenance and repair of the entire machine.
----After the expiration of the warranty period, if the user needs
maintenance and technical services, we will only charge a cost fee.
Packing list
| Number | Name | Quantity | Unit |
| 1 | Host of X-ray fluorescence oil sulfur analyzer | 1 | Unit |
| 2 | Three core power cord | 1 | Root |
| 3 | Sample Cup | 200 | Set |
| 4 | Sample cup film | 2 | Box (100 pieces/box) |
| 5 | Oil leakage prevention components (two pieces per set) | 1 | Set |
| 6 | Multi functional pressing parts (two pieces per set) | 1 | Set |
| 7 | Printing paper | 2 | Piece |
| 8 | Calibration (calibration) standard sample | 1 | Set |
