Product Description
LAUNCH PFP-100 Programming Flash Power is a must tool for vehicle
diagnosis. It can prevent failure and abnormal during the process
of programming due to low voltage. It has battery protection with
automatic stop and alarm. It is used by garages, car electricians
and car dealerships, mainly for supplying continuous power to the
vehicles battery, during all stages of ECU reprogramming and
flashing, according to the request of car OEMS.
LAUNCH PFP-100 Programming Flash Power, A Must Tool For Vehicle
Diagnostic.
LAUNCH PFP-100 Programming Flash Power is a must tool for vehicle
diagnosis. It can prevent failure and abnormal during the process
of programming due to low voltage. It has battery protection with
automatic stop and alarm. It is used by garages, car electricians
and car dealerships, mainly for supplying continuous power to the
vehicles battery, during all stages of ECU reprogramming and
flashing, according to the request of car OEMS.LAUNCH PFP100 Programming Flash Power can constantly detect the
battery state to prevent damage from overcharging.
LAUNCH PFP100 Programming Flash Power is a professional 100A
vehicle battery power support unit with high-performance, compact
size and high-quality.
Product Features:5 Protection Modes: Reverse Protection, Short Circuit Protection, Low Voltage
Protection, Overheat Protection, Overcharge Protection, Synchronous
Rectification (220V only)
Normal Mode: Select the charging mode according to the position of vehicle
battery (inside or outside)
Exhibit Mode: For continual charge with low current in showrooms
Programming Mode: Provide a stable voltage source for the car in need of programming
or decoding, ranging from 12V to 16V
Hidden Repair Mode: Indicate whether the battery should be repaired or not. Work with
various batteries, such as AGM battery, Gel battery.
Following protection can be applied:
Overcharge protection: The machine will constantly detect the
battery state to prevent damage from overcharging in the charging
process.
Overheat protection: Flashpower will automatically stop charging
when the machine is overheated.
Low voltage protection: When the input voltage is lower than
required, the machine will not work.
Short circuit protection: The machine will not work and alarm when
internal part short circuit occurs.
Revers polarity protection: The LCD displays, if the battery clip
is reversed.
Product Specifications:Input Voltage: 110V / 220V
Power: 1200W
Max.Current: 100A
Charging Voltage: 12V
Programming Mode: 2~16V / 2~200A
MAH: 10~1200Ah
Dimension: 430.5*392.5*130 mm
Electric Cable Length: 3m
Weight: 8.5kgPackage includes:
1pc x LAUNCH PFP-100 unit
1pc x Battery clips plug connecting cable(3m)
1pc x Power supply
1pc x User manual
