Mortara ELI 250 ECG Machine Printer Roller with Motor Assembly
2-06-2006 PM35L-048-USG9 TC6207A
■ Product Describe
Printer Roller with Motor Assembly 2-06-2006 PM35L-048-USG9 TC6207A
is a professional medical grade accessory. The main compatible
device is Mortara ELI 250 ECG Machine. If you need to use it for
other devices, please consult before use to avoid irreversible
damage to the device due to incompatibility. This is an ELI 250 ECG
Machine printer component, consisting of a stepper motor
(PM35L-048-USG9), a rubber roller (2-06-2006) and a bearing
(TC6207A). It is a used accessory, but the function is intact and
can be used normally. The integrated precision transmission system
and sensor control ensure the stable output of ECG reports.
■ Product Picture
■ Functions
1. Drive the transmission of printing paper
The motor provides power to the roller to rotate the roller, which
in turn drives the printing paper to move in the printer at the set
speed and direction, ensuring that the printed content (waveform
and diagnostic report) can be accurately and continuously output to
the printing paper, and the motor quickly retracts to locate the
high-quality waveform area to reduce repeated printing.
2. Control the printing position
The roller and the print head work together to accurately control
the feeding amount of the printing paper, ensuring that the
position of the ECG waveform, text and other information on the
printing paper is accurate, which is convenient for doctors or
operators to clearly view and analyze the ECG data.
3. Ensure printing quality
During the rotation process, the roller will exert a certain
pressure on the printing paper, so that the printing paper and the
print head are in close contact, ensuring that the printed content
(waveform and diagnostic report) is clear and the lines are
complete, avoiding problems such as blurred handwriting and
waveform interruption.
4. Monitoring and feedback
This component may integrate sensors such as encoders. The encoder
can convert the rotation information of the roller into an
electrical signal and feed it back to the control system of the
printer. In this way, the control system can understand the
movement status of the roller in real time, such as rotation speed,
rotation angle, etc., so as to carry out precise control and
adjustment, realize closed-loop control, and further improve the
accuracy and stability of printing.
■ Products Parameters
| Product Name | Printer Roller with Motor Assembly |
| Model | For Mortara ELI 250 ECG Machine |
| Part Number | 2-06-2006 PM35L-048-USG9 TC6207A |
| Motor parameters | PM35L-048-USG9, 24V DC, 7.5A, 48 steps/rev, holding torque 41mN・m,
maximum speed 1000rpm |
| Roller parameters | TC6207A (6207 deep groove ball bearing), inner diameter 35mm, outer
diameter 72mm, thickness 17mm, maximum speed 13,000rpm |
| Transmission efficiency | Gear ratio 1:5, output torque 205mN・m, transmission error < 0.5% |
| Environmental adaptability | Operating temperature 5°C to 40°C, humidity 10%-80%
(non-condensing), vibration resistance ≤2.5g |
■ Application scenarios
1. Emergency
The printing speed is efficient at 50mm/s, and a complete 12-lead
report can be printed within 30 seconds, which also supports rapid
bedside diagnosis.
2. Remote consultation
During remote consultation, the printer automatically matches the
received ECG data format with DICOM protocol encrypted transmission
to ensure consistency of reports across institutions.
3. Mobile medical care
When used in an ambulance, the anti-vibration design of the motor
(2.5g) ensures stable printing in a bumpy environment.
