Building Materials ISO 11925-2 Single Flame Source Test
Ignitability Apparatus
ISO 11925-2 Single Flame Source Tester Product Introduction:
The flammability tester is designed based on the core principle of
Kleinbrenner in Germany. It uses standard flames to conduct
vertical direct combustion tests on samples to accurately evaluate
the combustion characteristics of building materials. The equipment
fully covers the detection requirements of multiple fire protection
levels such as B, C, D, E and Bfl, Cfl, Dfl, Efl under the EN
13501-1 standard, integrates intelligent control systems and
ergonomic operation interfaces, and provides laboratories with
efficient and reliable fire safety testing solutions. The system is
also compatible with international mainstream testing standards
such as DIN 4102; Part 1; Class B2, equipped with a high-precision
flame control system and real-time data acquisition module to
ensure that the test process strictly complies with ISO 11925-2 and
other specifications. It is suitable for building materials
manufacturers, quality inspection agencies and scientific research
institutions to conduct standardized testing of material flame
retardant properties.
ISO 11925-2 Single Flame Source Tester Standards:
EN ISO 11925-2:Reaction to fire tests -- Ignitability of products
subjected to direct impingement of flame -- Part 2: Single-flame
source test
DIN 53438:Testing of combustible materials
DIN4102-1:Fire behaviour of building materials and elements Part 1:
Classification of building materials Requirements and testing
ISO 11925-2 Single Flame Source Tester Technical Specification:
| Product name | ISO 11925 Single Flame Source Tester for Building Materials |
| Standard | ISO11925-2; DIN53438; DIN4102 |
| Application | Building Materials; Rail; IMO |
| Weight | About 50kg |
| Dimension | 400mm(W)*700mm(D)*600(H) |
| Power | AC 220V, 50/60Hz, 10A |
ISO 11925-2 Single Flame Source Tester Steps::
1. Prepare the test sample and fix it on the test stand.
2. Pre-treat the test sample so that it reaches the humidity and
temperature required by the standard.
3. Connect the combustion head and data acquisition system of the
test equipment.
4. Start the test and record the parameters during the test.
5. Analyze the test results to evaluate the combustion performance
of the floor covering.
6. After the test is complete, shut down the unit and perform
routine maintenance.
ISO 11925-2 Single Flame Source Tester Daily maintenance:
1. Regularly check the power line, data line and the interface of
the combustion head of the test equipment to ensure that they are
stable and reliable.
2. Regularly clean the combustion head and data acquisition system
of the test equipment to keep them clean and hygienic.
3. Regularly calibrate test equipment to ensure the accuracy and
reliability of test results.
ISO 11925-2 Single Flame Source Tester Precautions for using
materials:
1. Make sure the test sample meets the standard requirements,
including humidity, temperature, size, etc.
2. During the test, it is strictly forbidden to leave the test site
or turn off the test equipment.
3. During the test, attention should be paid to the safety of the
fire source, and the test site should be kept dry and clean.
4. When using the test equipment, follow the requirements of the
operation manual to ensure the smooth progress of the test process.
