Industrial Hot Air Blower High Performance Blower Belt Driven
Centrifugal Fan Boiler Centrifugal Fan Roots Type Blower
High-pressure fans have the following characteristics:
1, with blowing and suction dual function, one machine dual
purpose, can be used for suction, can also be used for blowing;
2, less oil or no oil operation, the output air is clean;
3. Compared with centrifugal fans and medium-pressure fans, the
pressure is much higher, often more than ten times that of
centrifugal fans;
4, if the pump body is the overall die-casting, and the use of
shockproof installation foot pedestal, then it is also very low
requirements for the installation foundation, and even can not be
fixed foot pedestal can be normal operation, very convenient, but
also very saving installation cost and installation cycle;
5. Compared with similar fans, its running noise is low, and
ultra-silent high-pressure fans are launched:
6, maintenance-free use; Its loss parts are only two bearings,
which basically do not need maintenance within the warranty period;
7, the mechanical wear of the high-pressure fan is very small,
because in addition to the bearing, there is no other mechanical
contact part, so the service life is of course very long, as long
as it is under normal conditions of use, 3 to 5 years is no problem
at all.
The use of high pressure fan:
When the high-pressure fan is running, the current consumed by the
motor will increase with the increase of pressure and vacuum. If
the current is too large, the contacter will jump off. In order to
prevent the jump or save electricity, please increase the
cross-sectional area of the air outlet as much as possible, or
install the air pressure and air volume regulating valve on the
suction or exhaust side.
Key Features
Applications
- Cement
- Industrial boiler
- Power generation
- Chemical processing
- Combustion-support
- Cooling systems
- Corrosive gas
- Dryer
- Dust collection
- Forced draft
- Fume exhaust
- General ventilation
- Incineration
- Induced draft
