Hanast 10:1 Potting Compound Insulation And Moisture-Proof Potting
AB Adhesive Black Two-Component Silicone Adjustable Customization
HN-8808B
1) Good adhesion, no corrosion
2) solid Small chemical shrinkage
3) no heat release, good insulation
4) wide temperature range (-50℃-200℃)
5) waterproof and moisture-proof
Product Model
Potting glue 8808B, is a two-component condensation type room
temperature curing silicone rubber, also known as RTV 2 Liquid
Silicone Rubber, composed of two parts of A and B. After the A and
B components are mixed at 10:1 (mixed ratio), they solidify into a
high-performance elastomer through a condensation reaction.
Product Features
1) Good adhesion, no corrosion
2) solid Small chemical shrinkage,
3) no heat release, good insulation,
4) wide temperature range (-50℃-200℃),
5) waterproof and moisture-proof
Main Application
It is mainly used in circuit boards, LED power supplies, waterproof
power supplies, automotive electronic modules, electrical
appliances, light sources, lamps, and their accessories for potting
protection. Especially for potting with adhesive requirements on
aluminum substrates.
Technical Sheet
| Before Mixing |
| A | B |
| Exterior | black liquid | Transparent liquid |
| Base chemical composition | Polysiloxane | Polysiloxane |
| Viscosity (cP) (GB/2794-1995) | 2000-2800 | 20-30 |
| Density (g/cm³) (GB/2794-1995) | 1.42±0.02 | - |
| A+B after mixing |
| Exterior | black liquid |
| Base chemical composition | Polysiloxane (Silicone) |
| Viscosity (cP) (GB/2794-1995) | 2000-2600mpa's |
| Density (g/cm³) (GB/2794-1995) | 1.40±0.02 |
| Operating time (25℃, min) | 40-60 |
| Curing time (25℃, h) | 4-6 |
| Hardness (shore A) (GB/T531-1999) | 30-40 |
| Volume resistivity Ω·cm (GB/T 31838.2-2019) | ≥5.0×10 14 |
| Thermal conductivity (W/M▪K) (GB/T 38712-2020) | 0.5±0.1 |
| Dielectric strength (kv/mm) | ≥14 |
| Dielectric constant | ≤3.5 |
| Elongation at break (%) | ≤100% |
Packaging Method
22kg/set (component A 20kg + component B 2kg)
11kg/set (component A 10kg + component B 1kg)
After-sales Service
1. Provide complete product technical information;
2. Debug the product formula according to customer requirements to
meet customer requirements for certain special properties of the
product;
3. Our company welcomes users to cooperate, communicate, and
discuss solutions with our engineers.
Attention
1. The rubber material should be sealed and stored. Use the mixed
glue at one time to avoid waste.
2. 10:1 colloid cannot be heated to accelerate solidification after
mixing.
3. This product is a non-dangerous product, but please keep it out
of your mouth and eyes.
4. This product is non-toxic and non-dangerous. Avoid rain and
exposure. Store in a cool and dry place. The shelf life is6months
(best use period3 within months)
