Cisco brand 2960X 24-Port Gigabit Ethernet Management Switch
WS-C2960X-24TS-LL
The Cisco WS-C2960X-24TS-LL is part of the Catalyst 2960-X series,
designed for enterprise-class access layer
switching. This switch provides a robust solution for small to
medium-sized businesses, offering high performance,
reliability, and advanced features. Below is a detailed description
of its key features, specifications, and benefits.
Product | WS-C2960X-24TS-LL |
Product Description | 2960-X 24 GigE. 2 x 1G SFP. LAN Lite |
Interface | Ethernet 10Base-T/100Base-TX/1000Base-T |
Qty | 2 |
Comments | Management |
Connector Type | Type A |
Type | USB |
Authentication Method | Kerberos, RADIUS, Secure Shell (SSH), TACACS+ |
Connectivity Technology | Wired |
Data Transfer Rate | 80 Gbps |
Remote Management Protocol | CLI, HTTP, RMON 1, RMON 2, SNMP 1, SNMP 2c, SNMP 3, SSH, Telnet,
TFTP |
Compliant Standards
| IEEE 802.1ae, IEEE 802.1AX, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q,
IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE
802.3ad (LACP), IEEE 802.3ae, IEEE 802.3az, IEEE 802.3u, IEEE
802.3x, IEEE 802.3z |
MAC Address Table Size | 16K entries |
Max Units In A Stack | 8 |
Subcategory | Network hubs and switches |
Power Over Ethernet (PoE) | No |
Manageable | Yes |
Form Factor | Desktop, Rack-mountable |
Jumbo Frame Support | 9216 bytes |
Subtype | Gigabit Ethernet |
Frequency Required | 50/60 Hz |
Nominal Voltage | AC 120/230 V |
Width | 17.5 in |
Depth | 11 in |
Height | 1.8 in |
Weight | 9.19kg |
FlexStack-Extended supported combinations
| Stack member | 2960-XR IP Lite | 2960-X LAN Base |
| 2960-XR IP Lite | Yes | – |
| 2960-X LAN Base | – | Yes |
Table 9.FlexStack-Extended scalability and performance
| Stack member | Stack bandwidth | Stack limit | Cisco IOS feature set |
| 2960-XR IP Lite | 40 Gbps | 8 | IP Lite |
| 2960-X LAN Base | 40 Gbps | 8 | LAN Base |
Figure 1.
Cisco FlexStack-Extended: Hybrid module
Figure 2.
Cisco FlexStack-Extended: Fiber module
The Cisco Catalyst 2960-X and 2960-XR Series Switches offer a range
of industry-leading features for effective energy
efficiency and energy management. They are the greenest switches in
the industry.
Switch Hibernation Mode (SHM) is an industry first and available on all 2960-X and 2960-XR
Series switches. This feature
puts the switch in ultra-low-power mode during periods of
nonoperation such as nights or weekends. SHM on the 2960-X and
2960-XR Series switches can be scheduled using Cisco EnergyWise® compliant management software.
IEEE 802.3az EEE (Energy Efficient Ethernet) enables ports to dynamically sense idle periods between traffic
bursts and
quickly switch the interfaces into a low-power idle mode, reducing
power consumption.
Cisco EnergyWise policies can be used to control the power consumed by PoE-powered
endpoints, desktop and data-center IT equipment, and a wide range
of building infrastructure. Cisco EnergyWise technology is included
on all Cisco Catalyst 2960-X and
2960-XR Series Switches.
