| Configurations |
| 10/100 Ethernet Interfaces | 48 |
| Uplink Interfaces | 2 SFP and 2 1000BASE-T |
| Cisco IOS Software Feature Set | LAN Base |
| Available PoE Power | 370W (24 ports up to 15.4W) |
| Hardware |
| Flash memory | 64 MB |
| DRAM | 128 MB |
| Performance and Scalability |
| Forwarding bandwidth | 16 Gbps |
| Maximum active VLANs | 255 |
| VLAN IDs available | 4K |
| Maximum transmission unit (MTU) - L3 packet | 9000 bytes |
| Jumbo frame - Ethernet frame | 9018 bytes |
| Forwarding Rate: 64-Byte L3 Packets, Millions of packets per second | 13.1 |
| Mechanical |
| Dimensions (H x W x D) | 1.73 x 17.70 x 13.07 in (4.4 x 45.0 x 33.2 cm) |
| Weight | 12 lb (5.4Kg) |
| Package Weight | 20.26 lb (9.19 Kg) |
| Environmental Ranges |
| Operating temperature up to 5000 ft (1500 m) | 23º to 113ºF (-5º to 45ºC) |
| Operating temperature up to 10,000 ft (3000 m) | 23º to 104ºF (-5º to 40ºC) |
| Short-term exception at sea level* | 23º to 131ºF (-5º to 55ºC) |
| Short-term exception up to 5000 feet (1500 m)* | 23º to 122ºF (-5º to 50ºC) |
| Short-term exception up to 10,000 feet (3000 m)* | 23º to 113ºF (-5º to 45ºC) |
| Short-term exception up to 13,000 feet (4000 m)* | 23º to 104ºF (-5º to 40ºC) |
| Storage temperature up to 15,000 feet (4573 m) | 23º to 158ºF (-25º to 70ºC) |
| Operating altitude | Up to 10,000 Feet (Up to 3,000 Meters) |
| Storage altitude | Up to 13,000 Feet (Up to 4,000 Meters) |
| Operating relative humidity | 10% to 95% noncondensing |
| Storage relative humidity | 10% to 95% noncondensing |
| Sound Pressure, dBA | Typical, LpAm: 41 Maximum, LpAD: 44 |
| Sound Power, dbA | Typical, LwA: 51 Maximum, LwAD: 54 |
| MTBF in thousands of hours | 312 |
| Connectors and Interfaces |
| Ethernet Interfaces | - 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5
unshielded twisted-pair (UTP) cabling
- 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
- 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
- 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP
cabling
|
| Indicator LEDs | - Per-port status: Link integrity, disabled, activity, speed, and
full duplex
- System status, Port Status, PoE, RPS, link duplex, and link speed
|
| Console | Cisco Catalyst console cables: - CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45
|
| Power | - The internal power supply is an auto-ranging unit and supports
input voltages between 100 and 240V AC.
- Use the supplied AC power cord to connect the AC power connector to
an AC power outlet.
- The Cisco RPS connector offers connection for an optional Cisco RPS
2300 that uses AC input and supplies DC output to the switch.
- Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to
the redundant-power-system receptacle.
|
| Standards | - IEEE 802.1D Spanning Tree Protocol
- IEEE 802.1p CoS Prioritization
- IEEE 802.1Q VLAN
- IEEE 802.1s
- IEEE 802.1w
- IEEE 802.1X
- IEEE 802.1ab (LLDP)
- IEEE 802.3ad
- IEEE 802.3af
- IEEE 802.3ah (100BASE-X single/multimode fiber only)
- IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T
ports
- IEEE 802.3 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3z 1000BASE-X
- RMON I and II standards
- SNMP v1, v2c, and v3
|
| RFC compliance | - RFC 768 - UDP
- RFC 783 - TFTP
- RFC 791 - IP
- RFC 792 - ICMP
- RFC 793 - TCP
- RFC 826 - ARP
- RFC 854 - Telnet
- RFC 951 - Bootstrap Protocol (BOOTP)
- RFC 959 - FTP
- RFC 1112 - IP Multicast and IGMP
- RFC 1157 - SNMP v1
- RFC 1166 - IP Addresses
- RFC 1256 - Internet Control Message Protocol (ICMP) Router
Discovery
- RFC 1305 - NTP
- RFC 1492 - TACACS+
- RFC 1493 - Bridge MIB
- RFC 1542 - BOOTP extensions
- RFC 1643 - Ethernet Interface MIB
- RFC 1757 - RMON
- RFC 1901 - SNMP v2C
- RFC 1902-1907 - SNMP v2
- RFC 1981 - Path MTU Discovery for IPv6
- FRC 2068 - HTTP
- RFC 2131 - DHCP
- RFC 2138 - RADIUS
- RFC 2233 - IF MIB v3
- RFC 2373 - IPv6 Aggregatable Addrs
- RFC 2460 - IPv6
- RFC 2461 - IPv6 Neighbor Discovery
- RFC 2462 - IPv6 Autoconfiguration
- RFC 2463 - ICMP IPv6
- RFC 2474 - Differentiated Services (DiffServ) Precedence
- RFC 2597 - Assured Forwarding
- RFC 2598 - Expedited Forwarding
- RFC 2571 - SNMP Management
- RFC 3046 - DHCP Relay Agent Information Option
- RFC 3376 - IGMP v3
- RFC 3580 - 802.1X RADIUS
|
| Voltage and Power Ratings |
| Voltage (Autoranging) | 100 to 240 VAC |
| Current (Amperes) | 4.0 - 2.0 |
| Frequency | 50 to 60Hz |
| Power Rating (kVA) | 0.46 |
| DC Input Voltages (RPS Input) | 3A at 12V (7A at -52V) |
| Power Consumption | 0% traffic: 51.1 10% traffic: 50.8 100% traffic: 51.4 ATIS weighted average: 50.9 |
| Safety and Compliance |
| Regulatory Compliance | Products should comply with CE Marking per directives 2004/108/EC
and 2006/95/EC |
| Safety | UL 60950-1 Second Edition CAN/CSA-C22.2 No. 60950-1 Second Edition EN 60950-1 Second Edition IEC 60950-1 Second Edition AS/NZS 60950-1 |
| EMC - Emissions | 47CFR Part 15 (CFR 47) Class A AS/NZS CISPR22 Class A CISPR22 Class A EN55022 Class A ICES003 Class A VCCI Class A EN61000-3-2 EN61000-3-3 KN22 Class A CNS13438 Class A |
| EMC - Immunity | EN55024 CISPR24 EN300386 KN24 |
| Environmental | Reduction of Hazardous Substances (RoHS) including Directive
2011/65/EU |
