| ance | 16-Gbps switching fabric (Catalyst 2960PD-8TT-L , Catalyst
2960-8TC-L, Catalyst 2960-
24TT-L, Catalyst 2960-24TC-L, Catalyst 2960-24LT-L, Catalyst
2960-24PC-L, Catalyst 2960-
48PST-L, Catalyst 2960-48TT-L, Catalyst 2960-48TC-L)
● 32-Gbps switching fabric (Catalyst 2960G-8TC-L, Catalyst
2960G-24TC-L, Catalyst 2960G48TC-L)
● Forwarding rate based on 64-byte packets:
Cisco Catalyst 2960PD-8TT-L: 2.7 Mpps
Cisco Catalyst 2960-8TC-L: 2.7 Mpps
Cisco Catalyst 2960-24TT-L: 6.5 Mpps
Cisco Catalyst 2960-24TC-L: 6.5 Mpps
Cisco Catalyst 2960-24LT-L: 6.5 Mpps
Cisco Catalyst 2960-24PC-L : 6.5 Mpps
Cisco Catalyst 2960-48TT-L: 10.1 Mpps
Cisco Catalyst 2960-48TC-L: 10.1 Mpps
Cisco Catalyst 2960-48PST-L: 13.3 Mpps
Cisco Catalyst 2960G-8TC-L: 11.9 Mpps
Cisco Catalyst 2960G-24TC-L: 35.7 Mpps
Cisco Catalyst 2960G-48TC-L: 39.0 Mpps
● 64 MB DRAM
● 32 MB flash memory
● Configurable up to 8000 MAC addresses
● Configurable up to 255 Internet Group Management Protocol (IGMP)
groups
● Configurable maximum transmission unit (MTU) of up to 9000 bytes,
with a maximum
Ethernet frame size of 9018 bytes (jumbo frames) for bridging on
Gigabit Ethernet ports and
up to 1998 bytes for bridging of Multiprotocol Label Switching
(MPLS) tagged frames on both
10/100 and 10/100/1000 ports |
| Connectors and cabling | ● 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5
unshielded twisted-pair (UTP)
cabling
● 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
● 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
● 1000BASE-T Small Form-Factor Pluggable (SFP)-based ports: RJ-45
connectors, 4-pair
Category 5 UTP cabling
● 1000BASE-SX, -LX/LH, -ZX, -BX and CWDM SFP-based ports: LC fiber
connectors
(single/multimode fiber)
● 100BASE-LX, -BX, -FX: LC fiber connectors (single/multimode
fiber) |
| Power connectors | Customers can provide power to a switch by using either the
internal power supply or the
Cisco RPS 675. The connectors are located at the back of the
switch.
● Note: The Catalyst 2960-8TC-L and Catalyst 2960G-8TC-L do not
have RPS ports.
● Internal power supply connector is an autoranging unit. that
supports input voltages between
100 and 240VAC. Use the supplied AC power cord to connect the AC
power connector to an
AC power outlet.
● Cisco RPS connector:
Offers connection for an optional Cisco RPS 2300 (model
PWR-RPS2300) that uses AC
input and supplies DC output to the switch. Only the Cisco RPS 2300
should be attached
to the redundant-power-system receptacle.
Offers a 2300W redundant power system that supports up to 6
external network devices
and provides power to 2 failed devices at a time.
Automatically senses when the internal power supply of a connected
device fails and
provides power to the failed device, preventing loss of network
traffic. |
| Indicators | Per-port status: Link integrity, disabled, activity, speed, full
duplex
● System status: System, RPS, link status, link duplex, link speed |
| Environmental ranges N | Normal Operating Conditions:
● -5ºC to +45ºC, up to 5,000 feet (1500 m)
● -5ºC to +40ºC, up to 10,000 feet (3000 m)
● -5ºC to +35ºC, up to 13,000 feet (4000 m)
Short-Term* Exceptional Operating Conditions:
● -5ºC to +55ºC, at sea level
● -5ºC to +50ºC, up to 5,000 feet (1500 m)
● -5ºC to +45ºC, up to 10,000 feet (3000 m)
● -5’C to +40’C, up to 13,000 feet (4000 m)
* Not more than the following in a 1-year period: 96 consecutive
hours, or 360 hours total, or 15
occurrences. For the Catalyst 2960G-8TC-L, reduce the high range
temperature by 5°C |
| Acoustic noise | ● ISO 7779: Bystander position operating to an ambient temperature
of 25°C ● 40 dBa |
Mean time between
failures (MTBF) | 407,707 hrs |
AC input voltage
and current | 100-240VAC (autoranging), 1.3–0.8A, 50–60 Hz |
| Power rating | 0.05 kVA |
DC input voltages
(RPS input) | +12V at 5A |
| Safety Certifications | ● UL 60950-1, First Edition
● CUL to CAN/CSA 22.2 No. 60950-1, First Edition
● TUV/GS to EN 60950-1, First Edition
● CB to IEC 60950-1 with all country deviations
● AS/NZS 60950-1, First Edition
● CE Marking
● NOM (through partners and distributors) |
Electromagnetic
Compatibility
Certifications | FCC Part 15 Class A
● EN 55022 Class A (CISPR22)
● EN 55024 (CISPR24)
● AS/NZS CISPR22 Class A
● CE
● CNS13438 Class A
● MIC
● GOST
● China EMC Certifications |
| Environmental | Reduction of Hazardous Substances (ROHS) 5 |
| Telco | Common Language Equipment Identifier (CLEI) code |
