Cisco Catalyst 2960-X and 2960-XR Series Switches Data Sheet
Cisco® Catalyst® 2960-X and 2960-XR Series Switches are fixed-configuration, stackable Gigabit Ethernet switches that provide enterprise-class access for campus and branch applications (Figure 1). They operate on Cisco IOS® Software and support simple device management as well as network management. The Cisco Catalyst 2960-X and 2960-XR Series provide easy device onboarding, configuration, monitoring, and troubleshooting. These fully managed switches can provide advanced Layer 2 and Layer 3 features as well as optional Power over Ethernet Plus (PoE+) power. Designed for operational simplicity to lower total cost of ownership, they enable scalable, secure, and energy-efficient business operations with intelligent services. The switches deliver enhanced application visibility, network reliability, and network resiliency.
Product Highlights
Cisco Catalyst 2960-X and 2960-XR Series Switches feature:
● 24 or 48 Gigabit Ethernet ports with line-rate forwarding performance
● 4 fixed 1 Gigabit Ethernet Small Form-Factor Pluggable (SFP) uplinks or 2 fixed 10 Gigabit Ethernet SFP+ uplinks
● PoE+ support with a power budget of up to 740W and Perpetual PoE
● Cisco IOS LAN Base or LAN Lite1 and Cisco IOS IP Lite
● Device management with web UI, over-the-air access via Bluetooth, Command-Line Interface (CLI), Simple Network Management Protocol (SNMP), and RJ-45 or USB console access
● Network management with Cisco Prime®, Cisco Network Plug and Play, and Cisco DNA Center
● Stacking with FlexStack-Plus and FlexStack-Extended
● Layer 3 features with routed access (Open Shortest Path First [OSPF]), static routing, and Routing Information Protocol (RIP)
● Visibility with Domain Name System as an Authoritative Source (DNS-AS) and Full (Flexible) NetFlow
● Security with 802.1X, Serial Port Analyzer (SPAN) and Bridge Protocol Data Unit (BPDU) Guard
Technical Specifications
Environmental Parameters
- Min Operating Temperature
- 23 °F
- Max Operating Temperature
- 113 °F
- Humidity Range Operating
- 10 - 95% (non-condensing)
- Min Storage Temperature
- -13 °F
- Max Storage Temperature
- 158 °F
- Humidity Range Storage
- 10 - 95% (non-condensing)
Header
- Compatibility
- PC
- Manufacturer
- Cisco
- Packaged Quantity
- 1
- Product Line
- Cisco Catalyst
- Model
- 2960X-24TS-L
- Brand
- Cisco
Interface Provided
- Interface
- Ethernet 10Base-T/100Base-TX/1000Base-T
- Qty
- 4
- Type
- USB
- Connector Type
- Type A
- Comments
- Management
Miscellaneous
- Compliant Standards
- AS/NZS 60950-1, AS/NZS CISPR22:2004 Class A, CISPR 22 Class A, CISPR 24, CNS 13438(95) Class A, CSA C22.2 No. 60950-1 Second Edition, Directive 2011/65/EU, EN 300386, EN 60950-1 Second Edition, EN 61000-3-2, EN 61000-3-3, EN55022 Class A, EN55024, FCC CFR47 Part 15, ICES-003 Class A, IEC 60950-1 Second Edition, KN22 Class A, KN24, RoHS, UL 60950-1 Second Edition, VCCI Class A
- Authentication Method
- Kerberos, RADIUS, Secure Shell (SSH), TACACS+
- MTBF
- 564,910 hours
- Height (Rack Units)
- 1
Networking
- Type
- Switch
- Remote Management Protocol
- CLI, HTTP, RMON 1, RMON 2, SNMP 1, SNMP 2c, SNMP 3, SSH, Telnet, TFTP
- Compliant Standards
- IEEE 802.1ae, IEEE 802.1AX, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad (LACP), IEEE 802.3ae, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
- Status Indicators
- Link/activity, Port duplex mode, Port transmission speed, Status, System
- Ports Qty
- 24
- Features
- Access Control List (ACL) support, ARP support, Auto-negotiation, Auto-uplink (auto MDI/MDI-X), Cisco EnergyWise technology, DHCP support, Dynamic ARP Inspection (DAI), Dynamic Trunking Protocol (DTP) support, Energy Efficient Ethernet, Hot Standby Router Protocol (HSRP) support, IPv4 support, IPv6 support, Jumbo Frames support, Layer 2 switching, Link Aggregation Control Protocol (LACP), MLD snooping, Multiple Spanning Tree Protocol (MSTP) support, NetFlow, Port Aggregation Protocol (PAgP) support, RADIUS support, Rapid Per-VLAN Spanning Tree Plus (PVRST+), Rapid Spanning Tree Protocol (RSTP) support, Remote Switch Port Analyzer (RSPAN), Shaped Round Robin (SRR), Trivial File Transfer Protocol (TFTP) support, Trunking, Uni-Directional Link Detection (UDLD), Unicast Reverse Path Forwarding (URPF), VLAN support
- Stackable
- Stackable
- Max Units In A Stack
- 8
- Subcategory
- Network hubs and switches
- Manageable
- Yes
- Form Factor
- Desktop, Rack-mountable
- Jumbo Frame Support
- 9216 bytes
- Subtype
- Gigabit Ethernet
Power Device
- Frequency Required
- 50/60 Hz
- Nominal Voltage
- AC 120/230 V
- Features
- Redundant Power System (RPS) connector
- Power Redundancy
- Optional
- Type
- Internal power supply
Processor
- Type
- APM86392
- Clock Speed
- 600 MHz
Service
- Support Details Type
- Technical support
- Support Details Service Included
- Consulting
- Support Details Full Contract Period
- 90 days
Service & Support Details
- Response Time
- Next business day
Slot Provided
- Type
- Stacking Module slot
- Total Qty
- 1
- Free Qty
- 1
Software
- Type
- Cisco IOS LAN Base
Dimensions & Weight
- Width
- 17.5 in
- Depth
- 11 in
- Height
- 1.8 in
- Weight
- 8.82 lbs
Service & Support
- Type
- Limited lifetime warranty
Capacity
- Type
- Virtual interfaces (VLANs)
- Value
- 1023
Flash Memory
- Installed Size
- 128 MB
Performance
- Type
- Switching capacity
- Value
- 216 Gbps
Ports
- Qty
- 24
- Type
- 10/100/1000
Ports (2nd)
- Qty
- 4
- Type
- Gigabit SFP
RAM
- Installed Size
- 512 MB
Table 1. Cisco Catalyst 2960-XR Series default power supply configurations
| Product ID |
Default power supply |
Available PoE power |
|
WS-C2960XR-24TS-I
WS-C2960XR-48TS-I
WS-C2960XR-24TD-I
WS-C2960XR-48TD-I
|
PWR-C2-250WAC |
– |
|
WS-C2960XR-24PD-I
WS-C2960XR-48LPD-I
WS-C2960XR-24PS-I
WS-C2960XR-48LPS-I
|
PWR-C2-640WAC |
370W |
|
WS-C2960XR-48FPD-I
WS-C2960XR-48FPS-I
|
PWR-C2-1025WAC |
740W |
Table 2. Cisco Catalyst 2960-X and 2960-XR Series PoE and PoE+ power capacity
| Model |
Maximum number of PoE+ (IEEE 802.3at) ports* |
Maximum number of PoE (IEEE 802.3af) ports* |
Available PoE power (single PS source) |
| Cisco Catalyst 2960X-48FPD-L |
24 ports up to 30W |
48 ports up to 15.4W |
740W |
| Cisco Catalyst 2960X-48LPD-L |
12 ports up to 30W |
24 ports up to 15.4W |
370W |
| Cisco Catalyst 2960X-24PD-L |
12 ports up to 30W |
24 ports up to 15.4W |
370W |
| Cisco Catalyst 2960X-48FPS-L |
24 ports up to 30W |
48 ports up to 15.4W |
740W |
| Cisco Catalyst 2960X-48LPS-L |
12 ports up to 30W |
24 ports up to 15.4W |
370W |
| Cisco Catalyst 2960X-24PS-L |
12 ports up to 30W |
24 ports up to 15.4W |
370W |
| Cisco Catalyst 2960X-24PSQ-L |
3 ports up to 30W |
7 ports up to 15.4W |
110W |
| Cisco Catalyst 2960XR-48FPD-I |
24 ports up to 30W |
48 ports up to 15.4W |
740W |
| Cisco Catalyst 2960XR-48LPD-I |
12 ports up to 30W |
24 ports up to 15.4W |
370W |
| Cisco Catalyst 2960XR-24PD-I |
12 ports up to 30W |
24 ports up to 15.4W |
370W |
| Cisco Catalyst 2960XR-48FPS-I |
24 ports up to 30W |
48 ports up to 15.4W |
740W |
| Cisco Catalyst 2960XR-48LPS-I |
12 ports up to 30W |
24 ports up to 15.4W |
370W |
| Cisco Catalyst 2960XR-24PS-I |
12 ports up to 30W |
24 ports up to 15.4W |
370W |
* Intelligent power management allows flexible power allocation across all ports.
Table 3. Cisco Catalyst 2960-XR Series available PoE and switch power capabilities with different combinations of power supplies
| Primary power supply |
Secondary power supply |
Available power for PoE+ |
Switch power redundancy |
Available PoE power when one PS fails |
| PWR-C2-250WAC |
– |
– |
No |
– |
| PWR-C2-250WAC |
PWR-C2-250WAC |
– |
Yes |
– |
| PWR-C2-640WAC |
– |
370W |
No |
– |
| PWR-C2-640WAC |
PWR-C2-640WAC |
370W |
Yes |
370W |
| PWR-C2-1025WAC |
– |
740W |
No |
– |
| PWR-C2-1025WAC |
PWR-C2-1025WAC |
740W |
Yes |
740W |
