ISO9227 Corrosion Resistance Testing for Automotive Components 600L
Complied Standards & Clauses
1. GB/T2423.17-2008/IEC 60068-2-11-1981 Salt Spray Test Method
2. ASTM. B117-2009 Salt Spray Test
3. JIS H8502 Salt Water Spray Test Method
4. GB/T10125-2012/ISO 9227-2006 Salt Water Spray Test Method
5. GB-T5170.8-2008 Inspection Method for Environmental Test
Equipment for Electrical and Electronic Products - Salt Spray Test
Equipment
6. GB-T5170.11-2008 Inspection Method for Corrosive Gas Test
Equipment
7. ISO9227 Salt Spray Test
8. GB-T10587-2006 Technical Conditions for Salt Spray Test Chamber
9. GJB-150.11A-2009 Military Equipment Environmental Test Method -
Salt Spray Test
Product information:
Ensure your products withstand the test of time and corrosion with
our ASTM B117 Salt Spray Test Chamber — the industry standard for
evaluating the corrosion resistance of coatings, metals, surface
treatments, and more.
This precision-engineered salt fog corrosion test chamber creates a
controlled, repeatable environment that simulates years of harsh
exposure in just days. Whether you're testing automotive
components, hardware, electronics, or industrial coatings, this
chamber provides accurate and reliable results in full compliance
with ASTM B117 and other international standards.
Crafted with high-quality corrosion-resistant materials, the
chamber features a user-friendly PLC control system, uniform spray
distribution, and excellent sealing performance to ensure
consistent test conditions and long-term durability. A transparent
observation window allows easy monitoring without interrupting the
test process.
Technical Parameters
| Power supply |
| Power supply conditions and power supply | AC230V single-phase two wire+protective grounding; Allowable
voltage fluctuation range ± 10% V; The allowable frequency fluctuation range is 60 ± 0.5HZ; TN-S power
supply or TT power supply; The grounding resistance of protective ground wire is less than 4
Ω; Users are required to configure air or power switches of
corresponding capacity for the equipment at the installation site,
and this switch must independently control the use of the
equipment. |
| Performance index |
| Use environment conditions | 1. The environment temperature is 5~30 ℃, and the relative humidity
is ≤ 85% R.H; 2. The installation site must be flat and vibration free; 3. The equipment shall be kept away from heat sources and flammable
and explosive substances; 4. The installation position shall not be directly exposed to
sunlight, and the indoor air circulation shall be maintained; 5. The equipment installation site shall be clean, and shall not be
installed in the place with more dust or at the dust outlet |
| Temperature and humidity range | Laboratory temperature: RT~ 50 ℃ Pressure barrel temperature: RT ~ 63 ℃ Relative humidity ≥ 85% R.H |
| Heating rate | Laboratory temperature RT →+50 ℃ ≤ 60 min Pressure barrel temperature RT →+63 ℃ ≤ 60 min |
