Product Description:
The total installed power of the equipment is about 161.5kW, the
operating power is about 90kW, and the electricity consumption per
ton is about 4.32kWh
The 500m3/d seawater desalination unit is in the form of a
container, requiring a 40-foot high container and
Each 40-foot standard container has 1 set, and the length, width
and height of the 40-foot high container are about 12m×2.3m×2.7m.
The length, width and height of a 40-foot standard container are
12m x 2.3m x 2.4m.
Air flotation device, quartz sand filter and water tank, located
outside the container
The process flow is as follows: original water tank – raw water
booster pump – air float – sand filter inlet pump – two-stage
quartz sand filtration – sand filter production tank – reverse
osmosis inlet pump – security filter – high pressure pump – energy
recovery device – reverse osmosis – production tank. Seawater is
taken out by the pump, first into the original water tank to adjust
the water quality and quantity, and then transported to the air
floating tank by the raw water booster pump to remove most of the
suspended solids, colloids, algae, etc., and then transported to
the two-stage quartz sand filter by the sand filter supply pump to
remove most of the suspended solids, sediment, colloids, particles
and other impurities in the seawater, and the filtered water enters
the sand filter production tank. After the pre-treated water passes
through the security filter, it is pressurized by high pressure
pump into the reverse osmosis desalting system. The reverse osmosis
system carries the pressurized concentrated water into the energy
recovery device for pressure recovery, and the low-pressure
concentrated water is discharged. After disinfection and tempering,
the produced water is transported to the water point through the
water supply system.
| Seawater salt content 25000mg/L~35000mg/L, turbidity <20NTU |
| Design operating temperature 5℃~30℃ |
| The total water output of the device is 500m3/d, which is designed
for 24 hours continuous operation |
| The design recovery rate of reverse osmosis is 40~ 45% |
| PLC+ touch screen is used for automatic control of the system |
Company Information:
Henan Yanjiang Environmental Technology Co., Ltd. as a professional
integrated environmental service provider, Committed to the
continuous improvement of traditional business and the development
of forward-looking business, for the global cities, towns and
enterprises, to provide environmental and development of the
overall solution and long-term stewardship service, in the field of
environmental pollution control and facility operation, sewage
treatment, seawater desalination, water purification equipment and
water reuse, organic waste comprehensive utilization and biomass
energy development and utilization, the environment Business
activities are carried out in the fields of restoration,
environmental safety management, environmental advisory services
and environmental investment and financing management.
FAQ:
Q: What is the brand name of the Seawater Desalination Equipment?
A: The brand name is Yanjiang.
Q: Where is the Seawater Desalination Equipment manufactured?
A: The equipment is manufactured in Yanjiang.
Q: Is the Seawater Desalination Equipment certified?
A: Yes, the equipment is certified by Yanjiang.
Q: What is the minimum order quantity for the Seawater Desalination
Equipment?
A: The minimum order quantity needs to be negotiated.
Q: What are the accepted payment terms for purchasing the Seawater
Desalination Equipment?
A: The accepted payment terms are L/C, D/A, D/P, T/T, Western
Union, and MoneyGram.
