IEC61010-1 Clause 6.2.2 Figure B.2 Jointed Finger Probe
1. Introduction
The Test Probe B, named as Jointed finger Probe, is designed according to the requirements of clause 5.9.2.1 and
Figure 6 of IEC60601-1, IEC61032/GB/T 16842, Appendix V.1.2 and
Figure V.2 of IEC62368-1, clause 8.1 of IEC60335-1, IEC60529,
clause 8.2.5 of IEC60598-1, clause 10.1 and clause 16.2.2.2 of
IEC60884-1, and clause 3.8.1 of AS/NZS 3112, and is used for
inspection of openings in equipment that are unlikely to be reached
by children.
2. Standard
IEC60601-1 Medical electrical equipment-Part 1: General
requirements for basic safety and essential performance clause
5.9.2.1and figure 6
IEC61032Protection of persons and equipment by enclosures - Probes
for verification figure 2
IEC62368-1 Audio/video, information and communication technology
equipment –Part 1: Safety requirements Annex V.1.2 and figure V.2
IEC60335-1 Household and similar electrical appliances - Safety -
Part 1: General requirements clause 8.1.1
IEC60529 Degrees of protection provided by enclosures (IP Code)
Table 6
IEC60598-1 Luminaires–Part 1: General requirements and tests Clause
8.2.5
IEC61010-1 Medical electrical equipment - Part 1: General
requirements for basic safety and essential performance Clause
6.2.2 and figure B.2
IEC60884-1 Plugs and socket-outlets for household and similar
purposes –Part 1: General requirements clause 10.1 and clause
16.2.2.2
AS/NZS3112 Approval and test specification—Plugs and socket-outlets
clause 3.8.1
3. Parameters
| Model | PG-TPB | PG-TPB-1 | PG-TPB-2 |
| Jointed point size 1 | 30±0.2 | 30±0.2 | 30±0.2 |
| Jointed point size 2 | 60±0.2 | 60±0.2 | 60±0.2 |
| Length of finger | 80±0.2 | 80±0.2 | 100±0.2 |
| Fingertip to baffle size | 180±0.2 | 180±0.2 | - |
| Fingertip taper fillet | S4±0.05 | S4±0.05 | S4±0.05 |
| Diameter of finger | Ф12 0 -0.05 | Ф12 0 -0.05 | Ф12 0 -0.05 |
| Diameter of baffle | Ф75±0.2 | Ф75±0.2 | Ф125±0.2 |
| Thickness of baffle | 5±0.5 | 5±0.5 | - |
| A-A section diameter | Ф50 | Ф50 | - |
| A-A section width | Ф20±0.2 | - | - |
| Thruster | 10N optional | 10N optional | 10N optional |
| Standard | IEC61032 | IEC60335-1 | IEC60335-2-14 |
4. Figure
