The KTG114-C flue oxygen analyzer can detect the oxygen content in
furnaces in real time
Introduction
The KTG114-C flue oxygen analyzer can detect in real time the
oxygen content in the gases exhausted after the combustion in
furnaces, annealing furnaces, heating furnaces, lead-free soldering
furnaces and various technological processes. It adopts an original
imported zirconia sensor from Germany, and the measurement and
control system uses the latest single-chip microcomputer
calculation and control system with LED display. It features high
accuracy, fast response, stable performance, complete functions,
convenient operation and continuous gas analysis process.
Features
(1) Adopts a direct-insert integrated design, with a simple
structure and convenient use.
(2) No need for a reference gas and is not affected by the external
environment.
(3) Quick calibration. It can be calibrated with air at one point,
and no standard gas is required.
(4) The original imported zirconia sensor has a fast response
speed, high resolution and good accuracy.
(5) Simple operation, supporting button and remote control
operations, and has a one-key calibration function.
(6) Long service life. The service life of the sensor is not less
than 50,000 hours.
Technical Parameters
(1) Measurement range: (0.00 - 25.00)% (The measurement range can
be arbitrarily selected).
(2) Maximum allowable error: ±2% F.S (0.00 - 25.00%).
(3) Repeatability: ±1.5% FS.
(4) Preheating time: ≤15 minutes.
(5) Response time: τ90 ≤ 15s.
(6) Applicable temperature: ≤750°C.
(7) Analog output: 4 - 20mA.
(8) Power supply voltage: 110VAC - 260VAC, 50/60Hz.
(9) Power consumption: 30W.
