ST-66 Activated carbon tetrachloride desorption rate meter
ST-66 Activated Carbon Tetrachloride Desorption rate meter is
suitable for measuring the tetrachloride desorption rate of wooden
activated carbon and coal based activated carbon. It is designed
and manufactured in accordance with the standard GB/T7702.19 "Test
methods for coal based granular activated carbon - Determination of
tetrachloride desorption rate". The instrument consists of a
high-precision temperature control unit, a stainless steel water
bath system, etc., which has the characteristics of high
temperature control accuracy and long insulation time.
The activated carbon tetrachloride desorption rate meter adopts a
4.3-inch intelligent touch screen, which automatically controls the
constant temperature of the water bath box, ensuring that the water
bath temperature is always maintained at the set temperature. The
new intelligent timing function allows for arbitrary setting of
working hours, avoiding the uncertainty of manual timing.
Adopting a high-precision platinum probe and a non fixed probe
design, it can detect real-time temperature at each working point
of the water bath at any time. The water bath unit adopts a
double-layer design, filled with environmentally friendly
insulation materials inside, which has excellent constant
temperature effect and is more energy-efficient. This instrument
device needs to be used in conjunction with the ST-65 carbon
tetrachloride adsorption rate tester
Main technical parameters:
Display method:LCD screen display
Temperature control method:fully automatic heating
Carbon layer height:(10 ± 0.2) cm
Measure the cross-sectional area of the tube:(3.15 ± 0.26) cm²
Timing function:The steam time can be set arbitrarily, and the gas
will automatically stop at the end of the timing
Purification device:(50mm × 320mm) × 2
Flow meter:10L
Temperature control accuracy:80 ℃± 0.1 ℃
Heating power:3KW
Number of samples:6
External dimensions:length × width × height
Temperature control system:255 × 550 × 450mm(L*W*H)
Thermostatic water bath:570× 525× 510 mm(L*W*H)
Voltage:AC220V 50HZ
| Display method | LCD screen display |
| Temperature control method | fully automatic heating |
| Carbon layer height | (10 ± 0.2) cm |
| Measure the cross-sectional area of the tube | (3.15 ± 0.26) cm² |
| Timing function | The steam time can be set arbitrarily, and the gas will
automatically stop at the end of the timing |
| Purification device | (50mm × 320mm) × 2 |
| Flow meter | 10L |
| Temperature control accuracy | 80 ℃± 0.1 ℃ |
| Heating power | 3KW |
| Number of samples | 6 |
| Temperature control system | 255 × 550 × 450mm(L*W*H) |
| Thermostatic water bath | 570× 525× 510 mm(L*W*H) |
| Voltage | AC220V 50HZ |
