Compound geomembrane at break ≥ 600% Tensile strength ≥ 20MPa
Product Overview
Compound geomembrane is a geosynthetic material composed of two or
more materials such as geotextile (or fiberglass mesh) and polymer
materials (such as PE film, EVA, etc.). It uses geotextile as the
water-conducting layer and polymer material as the anti-seepage
layer. It is made by calendering and hot-melt coating. It has
unique anti-seepage, protection and reinforcement, drainage,
isolation and other functions. Its high toughness and excellent
resistance to chemical erosion and anti-aging properties exceed the
usage indicators of simple application of cloth or membrane. It is
easy to construct, has a wider application field, and is more
convenient to use.
Function&Application
Mainly used in the anti-seepage treatment of dams and drainage
ditches, and the anti-fouling treatment of waste dumps.
1. Earth-rock dams, rockfill dams, masonry dams and roller
compacted concrete dams. 2. Channels and reservoirs (pits, holes).
3. Waterproof layer of expansive soil and collapsible loess.
4. Construction of cofferdam. 5. Anti-seepage lining for subways,
basements and tunnels. 6. Salt anti-seepage of roadbed and other
foundations.
7. Tailings dam, sewage reservoir dam body and reservoir area, and
waste plant. 8. The roof and basement are anti-seepage and
moisture-proof.
9. Horizontal anti-seepage paving in front of embankments and dams,
and vertical anti-seepage layer on the foundation.
Technical Parameters:
Tensile Strength | >=20MPa |
Chemical Resistance | Excellent |
Tear Resistance | >=80N |
Material | HDPE/LDPE/LLDPE |
Surface | Smooth/Textured |
UV Resistance | >=70% |
Elongation at Break | >=600% |
Weight | 200-1500g/m² |
Application | Landfill/Reservoir/Lagoon/Canal/Construction Site |
Width | 1m-8m |
Installation
1.For the laid composite geomembrane, the edge welding bead overlap
width is 80~100mm, and the joints are required to be free of dirt,
moisture, dust, etc.
2. Before welding, adjust the two sides of the PE single film at
the seam so that they overlap a certain width and are smooth and
wrinkle-free.
3. For details, pls check the composite geomembrane construction
plan.
Production&Package
Production: After being heated in a far-infrared oven, the
geotextile and geomembrane are pressed together on one or both
sides of the film in the form of a roller to form a composite
geomembrane.
Packaging: Packed in woven geotextile.
