CuNi2 Heating cable dedicated copper nickel wireAs a big manufacturer and exporter in China on the line of electric
resistance alloy, we can supply all kinds of electric resistance
alloy wire and strips (resistance steel wire and strips),
Material: CuNi1, CuNi2, CuNi6, CuNi8, CuNi14, CuNi19, CuNi23,
CuNi30, CuNi34, CuNi44
General Description
Due to has high tensile strength and increased resistivity values,
TANKII copper nickel alloy wires are the first choice for
applications as resistance wires. With the different nickel amount
in this product range, the characteristics of the wire can be
chosen according to your requirements. Copper nickel alloy wires
are available as bare wire, or enamelled wire with any insulation
and self-bonding enamel. Furthermore, litz wire made of enamelled
copper nickel alloy wire are available.
Features
1. Higher resistance than copper
2. High tensile strength
3. Good bending proof performance
Application
1. Heating applications
2. Resistance wire
3. Applications with high mechanical requirements
4. Others
Appicaton:
Low-voltage circuit breaker, thermal overload relay, electrical
heating cable, electrical heating mats, snow melting cable and
mats, ceiling radiant heating mats, Floor heating mats & Cables,
Freeze protection cables, electrical heat tracers, PTFE heating
cables, hose heaters, and other low-voltage electrical product
Size
Wires: 0.01-10mm Ribbons: 0.05*0.2-2.0*6.0mm
Strips: 0.05*5.0-5.0*250mm Bars: D10-100mm
Chemical Content, %
| Ni | Mn | Fe | Si | Cu | Other | ROHS Directive |
| Cd | Pb | Hg | Cr |
| 2 | - | - | - | Bal | - | ND | ND | ND | ND |
Mechanical Properties
| Max Continuous Service Temp | 200ºC |
| Resisivity at 20ºC | 0.05±10%ohm mm2/m |
| Density | 8.9 g/cm3 |
| Thermal Conductivity | <120 |
| Melting Point | 1090ºC |
| Tensile Strength,N/mm2 Annealed,Soft | 140~310 Mpa |
| Tensile Strength,N/mm2 Cold Rolled | 280~620 Mpa |
| Elongation(anneal) | 25%(min) |
| Elongation(cold rolled) | 2%(min) |
| EMF vs Cu, μV/ºC (0~100ºC) | -12 |
| Micrographic Structure | austenite |
| Magnetic Property | Non |
Application of CuNi2
CuNi2 low resistance heating alloy is widely used in low-voltage
circuit breaker, thermal overload relay, and other low-voltage
electrical product. It is one of the key materials of the
low-voltage electrical products. The materials produced by our
company have the characteristics of good resistance consistency and
superior stability. We can supply all kinds of round wire, flat and
sheet materials.
Shanghai Tankii Alloy Material Co., Ltd.specialized in production
of Resistance Heating Alloy, Nickel Chromium Alloy, Iron Chromium
Aluminum Alloy, Nickel Aluminum Alloy, Magnin, Copper Nickel Alloy,
thermocouple wire, pure nickel and other precision alloy materials
in the form of round wire, ribbon wire, sheet, tape, strip, rod and
plate.
We've already got ISO9001 quality system certificate and approval
of ISO14001 environmental protection system.
We own a complete set of advanced production flow of refining, cold
reduction, drawing and heat treating etc. We also proudly have
independent R&D capacity.
Shanghai Tankii Alloy Material Co., Ltd has accumulated lots of
experiences over nine years in this field. During nine years, more
than 60 management elites and high science and technology talents
were employed.They participated in every walk of the company life,
which make our company keep blooming and invincible in the
competitive market.
Based on the principle of "first quality, sincere service", our
managing ideology is pursuing technology innovation and creating
the top brand in the alloy field. We persist in Quality - the
foundation of the survival. It is our forever ideology to serve you
with full heart and soul. We committed to provide customers all
over the world with high-quality, competitive products and perfect
service.
Our products, such us nichrome wire, nichrome strip, fecral wire,
fecral strip, thermocouple wire, nickel wire, nickel strip have
been exported to Europe, USA, India, Southest Asia, South
America,etc.
