Total 13870 products for angle probe ultrasonic testing Manufacture & Suppliers

• CSL Cross Hole Ultrasonic Monitor Non Destructive Testing Method

  

  ... tubes or probes embedded in the concrete. One probe acts as a transmitter, while the other acts as a receiver. As the ultrasonic waves travel through the concrete, they are reflected back to the receiver by...

  Chongqing Gold Mechanical & Electrical Equipment Co.,Ltd

  Chongqing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Ultrasonic Thickness Gage Ultrasonic Thickness Testing Equipment Ultrasonic Probe

  

  Ultrasonic Thickness Gage Ultrasonic Thickness Testing Equipment Ultrasonic Probe HIGH PRECISION ULTRASONIC THICKNESS GAUGE TG3230, ultrasonic thickness gauge, thickness tester TG-3230 is a simple to use, hand-...

  HUATEC GROUP CORPORATION

  Beijing

  Verified Supplier

  Add to cart

  Contact Supplier

• Ultrasonic NDT Testing PT-08B 5MHz 8mm Probe Transducer

  

  ...Probe Transducer for Ultrasonic Inspection NDT Testing Specification of PT-08B Probe MHz 5MHz Crystal diameter 8mm Range 1.00-100mm Comments Standards Diagram 11mm*28mm*16.5mm Connector lemo-00 Application S...

  TMTeck Instrument Co., Ltd

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Ultrasonic Flaw Detector Mitech Ultrasonic Hollow Shaft Probe for Hollow Shaft Probe

  

  Mitech Ultrasonic Hollow Shaft Probe used for Hollow Shaft Probe Overview Mitech ultrasonic Angle Beam probe, choice superior performance of the piezoelectric material chip, damping block and protective film. S...

  Mitech CO.,LTD.

  Beijing,China

  Active Member

  Add to cart

  Contact Supplier

• Non-Metal Ultrasonic Probe Transducer Pair for Concrete Wood Rock NDT Testing

  

  Non-Metal Ultrasonic Probe Transducer Pair for Concrete Wood Rock NDT Testing Product Features Professional ultrasonic NDT probe for non-metallic materials detection, including concrete, wood, rocks, etc. Used ...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 12.5KHz-250KHz BNC Ultrasonic Transmitter Receiver Probe for Non-Destructive Testing

  

  12.5KHz-250KHz BNC Ultrasonic Transmitter Receiver Probe for Non-Destructive Testing Product Features Professional ultrasonic NDT probe for non-metallic materials detection, including concrete, wood, rocks, etc...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• GE HealthCare L5-11-RS Ultrasound Transducer Probe 5767215 H48102BJ

  

  ...Probe new original ►Quick Detail: The GE L5-11-RS Ultrasonic Transformer Probe is composed of a piezoelectric chip, damping block, connector, cable, protective film, and housing. It is one of the most import...

  China World Technology Medical Equipment Service Group

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Ultrasonic Probing Spray Coating On The Inner Wall Of Test Tubes 60Khz

  

  Ultrasonic Probing Spray Coating On The Inner Wall Of Test Tubes 60Khz Description: The 60Khz ultrasonic probing atomization nozzle is designed with a frequency of 60K and an airflow channel to produce 28 micro...

  Hangzhou Qianrong Automation Equipment Co.,Ltd

  Zhejiang,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 90° Curved 5 - Step NDT Calibration Blocks Pipe Thikness Test Block Calibration Certificate

  

  Ultrasonic Calibration Block 90° Curved 5-Step Block for thickness and linearity calibration of curved surface Specifications: Calibration blocks is an important supplementary material in the Ultrasonic testing...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Lightweight Usb Ultrasonic Flaw Detection Equipment Small Volume

  

  ...Dia 20mm, 2.5MHz) Angle probe 1 (13×13, 60°, 2.5MHz) Measuring Range and Specification: Range of scanning: 0 mm ~1000 mm Resolution for scanning: 1mm ......

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 5 Step Ultrasonic Calibration Blocks , ultrasonic reference blocks Thickness step wedge block

  

  ...Ultrasonic Calibration Block for thickness and linearity calibration Specifications: Calibration blocks is an important supplementary material in the Ultrasonic testing, used to calibrate the sensitivity of ...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Industrial Ultrasonic Probe Housing with Various Crystal Hole Sizes

  

  ...Ultrasonic Probe Housing with Various Crystal Hole Sizes Single Contact (Stainless steel Inner ring selectable, hole dia. Up to 15 mm standard open hole dia. For crystal, 10.2, 12.2, 12.85 mm) Dual Contact (...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Line Focused Composite Probes TMTECK MADE EQUVI. KARL DEUTSCH PROBES

  

  ...probes TMTECK MADE EQUVI. KARL DEUTSCH PROBES Composite probs for testing of tubes and bars: Technical meaning of the part codes: TSC = immersion composite type W = soft matching layer z = focal distance in ...

  TMTeck Instrument Co., Ltd

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Abe Angle Beam Probe 14x14mm Ultrasonic Transducer For Ultrasonic Flaw Detector

  

  ABE 14X14mm Angle Beam Probe ●Band width 45-55% at - 6dB ●Sensitivity better than KK 6-8dB more ●Lemo 00 equivalent connector are standard. Model Frequency Mhz Size (mm) Angle ABE-0245 2 14 X 14 45 ABE-0260 2 1...

  TMTeck Instrument Co., Ltd

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• ASME Basic Ultrasonic Calibration Blocks for welds UT examination

  

  ...used to calibrate the sensitivity of the ultrasonic flaw detector and ultrasonic probe. Our testing block is certificated by the authority of the state depeartment. Our products include: domestic standards U...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• DS Ultrasonic Calibration Blocks for longitudinal distance and sensitivity calibration

  

  ...calibration DS Ultrasonic Calibration Blocks Specifications: Calibration blocks is an important supplementary material in the Ultrasonic testing, used to calibrate the sensitivity of the ultrasonic flaw dete...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• AWS - type DSC Ultrasonic Calibration Blocks for shear wave distance

  

  ... testing, used to calibrate the sensitivity of the ultrasonic flaw detector and ultrasonic probe. Our testing block is certificated by the authority of the state depeartment. Our products include: domestic s...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Ultrasonic Flaw Detector / UT Calibration Blocks IIW V1 ( A2 ) Type DIN 54-120 BS2704

  

  ... testing, used to calibrate the sensitivity of the ultrasonic flaw detector and ultrasonic probe. Our testing block is certificated by the authority of the state depeartment. Our products include: domestic s...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Test Block Phased Array B Type NDT Calibration Blocks for Beam Characterization

  

  ...Calibration blocks is an important supplementary material in the Ultrasonic testing, used to calibrate the sensitivity of the ultrasonic flaw detector and ultrasonic probe. Our testing block is certificated ...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Medical Testing Tube Ultrasonic Coated System 60Khz Penetrator Nozzle Nebulizer

  

  ...Testing Tube Ultrasonic Coated System 60Khz Penetrator Nozzle Nebulizer Description: The vacuum blood collection and ultrasonic spraying technology uses a probe type ultrasonic nozzle to coat the inner wall ...

  Hangzhou Qianrong Automation Equipment Co.,Ltd

  Zhejiang,China

  Verified Supplier

  Add to cart

  Contact Supplier