Total 13648 products for angle probe ultrasonic testing Manufacture & Suppliers

• Carbon Steel NDT Testing Equipment Ultrasonic Eddy Current Test High Stability

  

  ... the workpiece willl move to the testing area, then pipe rotated ,probes move right and left ; When find defects, the instrument will automatic alarm, at the same time it will display the flaw signal; record...

  XIAMEN COBE NDT TECHNOLOGY CO.,LTD

  Fujian,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Gantry NDT Testing Equipment

  

  ... characteristics. Step : Work piece will be neatly put onto the platform; Work pieces will be put onto the orbit by the mechanical hand ,and then the workpiece willl move to the testing area, then pipe rotat...

  XIAMEN COBE NDT TECHNOLOGY CO.,LTD

  Fujian,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC62368-1-2018 Edition 3.0 Annex V.1.3 Test Method 2 Unjointed Test Probe

  

  ...or Figure V.2 are further tested by means of a straight unjointed version of the respective test probe applied with a force of 30 N. If the unjointed probe enters the openings, test method 1 is repeated, exc...

  KingPo Technology Development Limited

  Hong Kong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• GE C1-5-RS Ultrasound Transducer Wideband Curved Array Probe With Good Condition Use For Medical

  

  ...Probe Used with Good Condition Use for Medical GE C1-5-RS Ultrasound Transducer / Probe used ► Brief Introduction The GE C1-5-RS Ultrasound Transducer Curved Array Probe is a device used to transmit and rece...

  China World Technology Medical Equipment Service Group

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Mitech Industrial Ultrasonic Angle Beam TR Probes For Longitudinal Waves

  

  Overview Mitech Industrial Ultrasonic Angle Beam TR Probes For Longitudinal Waves,selects the superior performance of the piezoelectric material chip made carefully,strong penetrating power,high signal-to-noise...

  Mitech CO.,LTD.

  Beijing,China

  Active Member

  Add to cart

  Contact Supplier

• Ultrasonic Transducer Water Meter 75KHz Probe Level Sensor

  

  ...60dB min 4.Detection distance :0.25 m—6.0 m 5.Blind zone :<0.25 m 6.Launch angle beam (-3dB full angle) :14±2° 7.Electrostatic capacitance :2000PF±20% 8.Minimum parallel impedance :200Ω±30% 9.Maximum working voltage (Pulse wave - 2% ......

  Chengdu Haoli Electronic Technology Co.,Ltd.

  Sichuan,China

  Active Member

  Add to cart

  Contact Supplier

• IEC62368 Jointed Test Probe / Finger Length 80mm Diameter 12mm

  

  ..., IEC335, UL507, EN60529 figure 1, UL1278 figure 8.4 and etc. Standard description: Test Finger Probe IEC62368-1 T.3 Steady force test, 30 N Test Finger Probe The test is conducted by means of the straight u...

  Guangzhou HongCe Equipment Co., Ltd.

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• DA312 Ultrasonic Thickness Probe 10MHz 0.6-50mm Range

  

  ... with a small error range, providing reliable data support for industrial production and quality inspection. *Compact and lightweight: The probe is small in size and light in weight, making it easy to operat...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• High Sensitivity Ultrasonic NDT Probe Transducer for Non-Metallic Material Detection

  

  High Sensitivity Ultrasonic NDT Probe Transducer for Non-Metallic Material Detection Product Features Professional ultrasonic NDT probe for non-metallic materials detection, including concrete, wood, rocks, etc...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• High Flexible Gantry NDT Testing Equipment 20m/Min Speed For Non Ferrous Metals

  

  ... is better to control the testing quality . Can be applied to a variety of specifications of the size of the workpiece ultrasonic testing COBE and the well-known institutions, research institutes formed a co...

  XIAMEN COBE NDT TECHNOLOGY CO.,LTD

  Fujian,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Ultrasonic NDT Testing Equipment Eddy Current Inspection Equipment

  

  ... to control the testing quality . Can be applied to a variety of specifications of the size of the workpiece ndt testing COBE and the well-known institutions, research institutes formed a collaborative netwo...

  XIAMEN COBE NDT TECHNOLOGY CO.,LTD

  Fujian,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Roller Ultrasonic Hardness Tester , 3N Motorized Probe Portable Hardness Testing Equipment

  

  ... which painted on rotogravure cylinders with simple, fast and accurately method. Hardness test in Vickers have the advantage that are supposed to be non-destructive as the lasting surface indentation is micr...

  Guangdong Hoyamo Precision Instrument Limited

  Guangdong,China

  Active Member

  Add to cart

  Contact Supplier

• Line Focused Composite Probes Tmteck Made Equvi. Karl Deutsch Probes

  

  Composite probs for testing of tubes and bars: Technical meaning of the part codes: TSC = immersion composite type W = soft matching layer z = focal distance in water (mm) B = extended bandwidth �� = beam apertu...

  TMTeck Instrument Co., Ltd

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Ultrasonic Angle Beam Probe Twb Screw In Wedge Type 5 1.5 Mhz Frequency

  

  TWB SCREW-IN WEDGE TYPE ANGLE BEAM PROBE General weld inspection ,smaller object,thinner section Tube pipes ,pressure vessels,containers Pumps,value housing ......

  TMTeck Instrument Co., Ltd

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• M10-N55s-Ihc Standard Ultrasonic Wedge For Angle Beam Phased Array Probe A10

  

  M10-N55S-IHC Standard wedge for angle beam phased-array probe A10, normal scan, 55 degree shear wave, with IHC option (with irrigation holes and carbides). What you can enjoy if buying from us? We provide all t...

  TMTeck Instrument Co., Ltd

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC Test Finger Probe Kit Metal / Insluating Material For Accessibility Testing

  

  ... to verify adequate clearance from hazardous parts. Object probe: a test probe simulating a solid foreign object to verify the possibility of ingress into an enclosure. IP code probe: a test probe to verify ...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Metal Material Test Probe Kits Wedge Probe Jointed / Rigid Test Finger IEC60950-1

  

  ...Test Probe Kits (Wedge Probe, Jointed Test Finger, Rigid Test Finger and Test Pin) 1. Introduction The test probe kits are meet the requirement of IEC60950-1, includes jointed test finger, test pin, unjointe...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• HUH-5M Manual Probe UCI Ultrasonic Hardness Tester

  

  ...Probe UCI Ultrasonic Hardness Tester Application: Ultrasonic hardness tester model HUH-5M is widely used to measure hardness of small forgings, cast material, weld inspection, heat affected zone, Ion-nitride...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• TG-5700A/B Scan High Precision Ultrasonic Thickness Gauge

  

  ... reaches the measured object and propagates in the object. When it reaches the material interface, it is reflected back to the probe. The thickness of the measured material is determined by accurately measur...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Ultrasonic Thickness Gauge Live A&B Scan Single & Dual Element Probe

  

  ... of built-in A-scan snapshot and B-scan thickness function,thickness measurement through coating, large capacity data storage and so on. Based on the principle of ultrasonic measurement, it is a portable ind...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier