| Sign In | Join Free | My burrillandco.com |
|
Cable Fault Identification Device Electrical Test Equipment Product Description: HZGZ - 713 cable fault identification device is special instruments used to identified a particular cable from a bunch of cable, ...
...Cables Flexing Test Apparatus Product Infromation: The Rubber Cables Flexing Test Apparatus is designed and manufactured according to standard IEC 62368-1:2018 clause Annex G.7, IEC60065:2014 clause 16.3 b),...
... cables with rated voltage 450V/750V and below. Its design, production, inspection and other links are strictly in accordance with GB5013.1, GB5013.2-97 test standards on wear resistance test requirements, w...
...Testing Equipment For Vertical Flame Ignition Source Comply With IEC60695-11-2 Product information: This apparatus conforms to the standard requirement of IEC60332-1-1 Tests on electric and optical fibre cab...
...foam. Require the use of two different shapes of test samples to characterization of the characteristics of rectangular bar of the test sample to evaluate the flammability and combustion time of material, re...
...Test Equipment / Optical Power Meter Testing Fiber Optic Cable General information Handheld Optical Power Meter is newly designed fiber optic tester, it aims at fiber network installation, fiber network engi...
Tension Fatigue Tester for Cable Wire , Tension Fatigue Testing Equipment Product Description: The machine is specifically designed to test the life of the reel. During the test, the sample was continuously rec...
... the degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring the pH & conductivity. IEC 60754-1 is halogen-free cable came from and including the polymer...
...Testing Equipment Non Combustibility Test Apparatus ASTME2652 Application: When a certain amount of gas is supplied to the box and the standard ignition source is used to ignite the flame, this instrument ca...
...Testing Equipment Descriptions: Wire and cable resistance to burning chamber according to UL1581 / UL2556, ASTM D5025 / ASTM D 5207 requirements of the standard requirements of the testing of wire insulation...
Test finger nail , IEC 60335-1 Figure 7 Test Equipment Test finger nail Product information: The test finger nail complies with the IEC 60335-1figure 7 standard requirements. It is applicable for the non-remova...
HD Security Special BNC to BNC male to male CCTV Camera coaxial cable Description Model Number: RG59 BNC male to male cable RF Cable Assembly/Jumper/Interface Cable Specification Connector 1 BNC male straight C...
HD Security Special BNC to BNC male to male CCTV Camera coaxial cable Description Model Number: RG59 BNC male to male cable RF Cable Assembly/Jumper/Interface Cable Specification Connector 1 BNC male straight C...
... Cable Bending Testing Machine/Cable Testing Equipment for Headphone Line or USB Line Model: RS-8116-6B Purpose: It is suitable for bending resistance test on headphone cable, USB cable, multicore cable cond...
...Cable Extrusion Testing Machine 1. Scope of application: The performance of the servo cable extrusion resistance testing machine is mainly applicable to the extrusion resistance of mining cables below UC-0.6...
...Test Equipment With P225/75R1 Tire Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, u...
...Cable Anchorage Pull Force and Torque Test Equipment Complied Standards & Clauses It is designed and manufactured according to IEC62196-1: 2022 clause 25.3 Figure 17 and table 11, IEC60309-1: 2012 clause 23....
... smoke density tester is used for horizontal burning of a cable or fiber optic cable, the smoke that is released from the flame combustion or no flame combustion condition, the light transmission rate of smo...