Total 6795 products for compaction test apparatus Manufacture & Suppliers

• IEC60598-1 Luminaries Test Equipment Direct Plug In Test Apparatus

  

  ... of the plug-in device with plug-in pin on the socket during normal use is within the specified range. Compliance: It is suitable for testing the torque exerted on the output socket by the device which is to...

  SKYLINE INSTRUMENTS CO.,LTD

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Vertical Electrical Safety Test Equipment , Textiles Flammability Test Apparatus

  

  JIS1091-1992 Textiles Vertical Flammability Test Apparatus with 11mm Igniter 1. Introduction FZP-2 Textiles vertical flammability test apparatus is applied to test the burning behaviour of woven fabric, knitted...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Ball Pressure Test Apparatus Environment Test Equipment Industry Oven From RT To 300℃ Equip

  

  ...Test Apparatus 1. Introduction Oven is widely applied to the fields of motor, glass, ceramic, PC board, coating and etc. for the purpose of drying, preheat and finalize the design. The oven is consisted by w...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC60884-1 Table 18 Electrical Safety Test Equipment Power Cord Anchorage Torque Test Apparatus

  

  ... clause 23.2 table 18. It’s used to test the power cords and cables for household appliances. Parameters: 1. Torque disk diameter: 100mm 2. Weight: equipped with 2N, 3N 5N, ......

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Pendulum Vertical Impact Test Apparatus 2 In 1 AC220V/50Hz IEC62262 IK07 To IK10

  

  ...Pendulum and Vertical Impact Test Apparatus (2 in 1) 1. Standard Conforms to IEC60068-2-75, IEC62262, IEC60598, EN50102 2. Introduction The IK mechanical impact test apparatus is designed according to IEC600...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Cold Bend Test Apparatus SUS304 Electrical Safety Test Equipment

  

  ... Test Apparatus IEC60811-1-4 for Cable Made by SUS304 Stainless Steel 1. Introduction The cold bend test apparatus is designed according to IEC60811-1-4 clause 8.1 and figure 1, IEC60884-1, VDE0472, GB2951.4...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Button Control Vacuum Cleaner Test Apparatus DIS644 IEC60335-2-24 For Current Carry Hose

  

  ...Test Apparatus for Testing the Abrasion Resistance of Current-Carry Hose 1. Standards compliant: IEC60335-2-2 clause 21.102 figure 101 and IEC60335-2-24 2. Application: for testing the abrasion resistance of...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 220V Vacuum Cleaner Test Apparatus 10r/ Min IEC60335-2-24 For Flexing Resistance

  

  ....103 and figure 102 2. Application: for testing the resistance to flexing of current-carry hose of vacuum cleaner 3. Introduction Curreny-carrying hose flexing resistance test apparatus is designed according...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Connectors 30ML Spillage Test Apparatus IEC60335-2-15 With Spillage Prtoection

  

  ... with spillage protection to ensure that the connectors are not affected by liquids when installed in a rated voltage base according to the manufacturer’s installation instructions. the spillage test is...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Figure 101 Splash Test Apparatus IEC60335-2-75 0.4Mpa For Cookware Oven

  

  ..., IEC60335-2-64 clause 15.1.1 and 15.1.2, GB4706.38 and GB4706.52. It’s used for the splash test of the appliance of the professional type classified IPX1, IPX2, IPX3 and IPX4. The whole device is made of al...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Ground Recessed Luminaires Torque Load Test Apparatus IEC60598-2-13 Figure 13.6.2.1

  

  ...Test Apparatus 1. Introduction The ground recessed luminaires torque load test apparatus is designed according to IEC60598-2-13 figure 13.6.2.1 “torque test”. Parts of luminaire that may be subjected to rota...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Manual 300N Compression Test Apparatus Plug Socket Test Equipment

  

  ... socket-outlet is then pressed between two flat surfaces with a force of 150 N for 5 min, as shown in figure 8. The specimen is checked 15 min after removal from the test apparatus, and shall not show...

  HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Hand-Operated 0.14J to 1J Universal Spring Hammer Test Apparatus IEC62262

  

  ... (0.7J) and IK06 (1J) tests. It can meet the test requirements of IEC62262 and IEC60068-2-75. The spring hammer consists of the body, the striking element and the release system. The striking element for sev...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 2J to 50J Pendulum Hammer Mechanical Impact Test Apparatus IEC62262

  

  ...Mechanical Impact Test Apparatus IEC62262 1. Introduction The pendulum hammer mechanical impact test apparatus can meet the test requirements of IEC60068-2-75 and IEC62262. The equipment consists of striking...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Lateral Pull Test Apparatus for Testing Appliance Couplers as per IEC60320-1

  

  Appliance Couplers Lateral Pull Test Apparatus 1. Introduction The appliance couplers lateral pull test apparatus is designed to meet the test requirements of IEC60320-1 clause 23.3 and figure 8 to verify if th...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Cable Static Flexibility Test Apparatus IEC60227-2

  

  Cable Static Flexibility Test Apparatus IEC60227-2 1. Introduction The static flexibility test apparatus is designed to meet the test requirements of IEC60227-2 clause 3.5 and GB/T5023.2 clause 3.5 for testing ...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• PLC Control IEC60112 Standard Tracking Index Test Apparatus with 220V/50Hz Power and 12 Months Warranty

  

  ...-1 clause 8.9.1.7, IEC60335-1 clause 29, IEC61010-1 clause 6.7.1.3, IEC60884-1 clause 28.2, and BS1363-1 clause 8.2 Appendix C. It is widely used in material testing on lamps, household appliances, IT/AV app...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC60320-1 Compliant Lateral Pull Test Apparatus with PLC+5 Inch Touch Screen Control for 6N/35N/50N Pull Force Testing

  

  Appliance Couplers Lateral Pull Test Apparatus 1. Introduction The appliance couplers lateral pull test apparatus is designed to meet the test requirements of IEC60320-1 clause 23.3 and figure 8 to verify if th...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC62196 Electric Vehicle Label Marking Abrasion Test Apparatus

  

  ...Test Apparatus Complied Standards & Clauses IEC 62196-1: 2020 Ed.4CDV clause 8.7, figure 8. Equipment Overview This label marking abrasion test apparatus conforms to IEC 62196-1Ed.4CDV clause 8.7, figure 8. ...

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Electric Vehicle Single Station Plugs Connectors Misalignment Test Apparatus IEC62196-3

  

  ... 18. Equipment Overview During temperature rise test, immediately following temperature stabilization, the accessories are subjected to external mechanical loads as illustrated in Figure 18. Using a force ga...

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier