| Sign In | Join Free | My burrillandco.com |
|
... Energy Pendulum Hammer Impact Test Apparatus Product overview: This High Energy Pendulum Hammer Impact Test Apparatus is a high-energy pendulum impact tester used for mechanical strength testing of househol...
... Test Apparatus Product Introduction: The IK07-IK10 Mechanical Vertical Impact Test Apparatus is designed and manufactured according to the standard requirements of IEC60068-2-75, IEC60598-1, IEC62262 and et...
... clause 4.7.3, IEC60065:2014 clause 14.1, 20.2.1, 20.2.4, Annex G, IEC60335-1 clause 30, etc. It is also applicable in the horizontal, vertical flammability test of the relative combustion characteristic of ...
...Test Apparatus Production Information: This Insulation Surface Scratch Resistance Test Apparatus meets the requirements of IEC 62368-1 clause 5.4.1.5.3, IEC 60335-2-78:31; IEC 60335-2-95:31; IEC 60335-2-97:3...
... Test Apparatus Product information: This Tensile Strength and Elongation Test Apparatus is designed and manufactured according to the standard requirement of IEC 62368-1:2018 Annex C, Annex G.5, clause Y.4....
...IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the ......
....5, IEC60884-1, IEC60598-1, etc. It is used to check whether the cord anchorage of the household appliances’ power cord is firm, can process the pull force and torque testing....
... rise test, immediately following temperature stabilization, the accessories are subjected to external mechanical loads as illustrated in Figure 18. Using a force gauge, ......
... 60950:2013 clause 1.7.11, IEC 60669-1 clause 8.9, etc. It is suitable for all kinds of plastic injection, silk screen surface for abrasion test, such as: computer, mobile phone (PDA), MP3, CD/VCD/DVD, cordl...
....5, IEC60884-1, IEC60598-1, etc. It is used to check whether the cord anchorage of the household appliances’ power cord is firm, can process the pull force and torque testing. It...
...Test Apparatus With PLC Control Product overview For Glow Wire Flammability And Temperature Test Apparatus: This device is manufactured according to the standard of IEC60695-2-10, IEC 60695-2-11, IEC 60695-2...
... 22.32, IS: 9968 (Part 1 & 2), IS: 6380, IS: 10810-16, etc. Application:It is applicable for the aging test of the electric wire, the insulation layer and sheath of the rubber (plastic, artificial leather) a...
...2022 Cord Retention Testing Apparatus For The Effectiveness Of Cable Product Information For Cord Retention Testing Apparatus: This device conforms to the standard requirement of IEC 60884:2022 clause 23.2 f...
...-1: 2022 clause 33. The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable .....
IEC60335-2-14 High Quality Testing Equipment Defrosting Test Apparatus SN1124 Product Information: The apparatus for water evaporation for accumulation of frost is designed in accordance with IEC 60335-2-24 cla...
...Test Apparatus With Load Product Overview: The flexibility testing apparatus is designed and manufactured according to requirements of IEC62196-1: 2022 clause 26.4 figure 20, IEC60309-1: 2012 clause 24.4 fig...
... according to the standard requirement of IEC 62368-1:2018 Annex C, Annex G.5, clause Y.4.3, etc. It is used to test the deterioration, deformation, melting or cracking of the gasket material at the conclusi...
...Testing Apparatus for EV Product Information: The flexibility testing apparatus is designed and manufactured according to requirements of IEC62196-1: 2022 clause 26.4 table 14, IEC60309-1: 2012 clause 24.4 f...
IEC 60068-2-75 EV Charging Station High Energy Pendulum Hammer Impact Test Apparatus Product information: This test apparatus is used for the impact resistance test of household and similar electronic and elect...
....4 table 14, IEC 60309-1:2012 clause 24.4 figure 9, and related standards. It is intended for conducting mechanical load flexing tests on vehicle plugs, socket-outlets, couplers, and non-rewireable accessori...