| Sign In | Join Free | My burrillandco.com |
|
UL Sprinkler Tester Water Movable Spray Heads Test Apparatus Application: The Sprinkler test shall to consist a single spray heads mounted as show UL 1598, the spray heads shall be according to UL 1598. The wat...
...Test Apparatus Introduction: A new term heat transfer index (HTI) has been introduced to avoid confusion with the thermal protective index (TPI) or other terms used in previous versions of this test. HTI ca...
Salt spray chamber corrosion test apparatus for testing outdoor units Specification Internal Dimension W*H*D(mm) 1200*1000*500mm External Dimension W*H*D(mm) 2050*1250*1400mm ......
... performance evaluation of the walls and ceilings, measurement results are expressed as an index of flame propagation. During the test, the specimen is exposed to the tubular torch, heat release of the lamp ...
ZJ Light-Duty Strain Controlled Direct Shear Apparatus Application: ZJ Light-duty Strain Controlled Direct Shear Apparatus is a kind of strain controlled direct shear apparatus used to test resisting shear stre...
...Test Apparatus Product information: The plug pins insulating sleeves abrasion test apparatus meets the requirements of IEC 60884-1 2013 clause 24.7 and figure 28, BS1363-1 figure 9. It is used to test the ab...
...Test Apparatus Equipment Overview: The Pendulum Impact Test Apparatus is manufactured in accordance with the requirements of IEC60068-2-75, IEC60884-1 clause 24.1, etc. It is suitable for the mechanical stre...
IEC 60884-1 Figure 15 Connections Of Conductors Pull Force Test Apparatus For Socket Test Product Information: This test apparatus conforms to IEC 60884-1:2022 clause 13.4 figure 15. It is used to detect the so...
...Test Apparatus For The Verification Of Resistance To Heat Product information: The test apparatus conforms to BS1363-1: clause 22.1.3 and figure 23, IEC 60884-1 clause 24.19, 25.4, figure 38, etc. Technical ...
IEC60335-1 Electrical Appliance Tester Household Appliance Supply Cord Flexing Test Apparatus Product information: This test apparatus checks the protection of the supply cord where it enters the appliance. It ...
...Electrical Appliance Tester Household Appliance Supply Cord Flexing Test Apparatus With One Station Product information: The Household Appliance Supply Cord Flexing Test Apparatus is special designed and man...
...hand-held mixers are also subjected to the following test while mounted on an apparatus similar to that of Figure 8. The supply cord is suspended vertically from the appliance and loaded so that a force of 1...
...Testing Equipment Description: Used to determine the permeability coefficient of the soil, The whole system is compact. Reasonable design, Convenient to disassemble and assemble, equable stress (use the hand...
...Test Apparatus for Rock Specimens Digital Point - Load Test Apparatus for Rock Specimens Small MOQ: we accept small quantity order to supports our cooperation. Excellent quality with competitive price: All o...
...-2011 clause 18, it’s used to test the lamp holder when normal use shall cause no excessive wear or other harmful effect. The lamp holder’s insulation and protection against accidental ......
...Test Apparatus for Insulating Sleeves Plug Socket Tester 1. Introduction: The high temperature pressure test apparatus conforms to the standard of IEC60884-1 clause 30.1 figure 41, IEC60598-2-20 clause 20.15...
...: rewirable plug, rewirable mobile socket, non-rewirable plug and non-rewirable mobile socket 4. Introduction Cord retention testing apparatus is designed according to the IEC60884-1 clause 23.2...
...60884-1 Figure 8 Plug and socket-Outlet Compression Test apparatus for Checking Mechanical Strength of Plug and Socket-Outlet 1. Introduction The compression test apparatus is designed to meet the test requi...
Cover-Plates Test Apparatus 1. Introduction The cover-plates test apparatus meets the requirements of IEC60884-1 clause 24.14.2 figure 31 and IEC60669-1 clause 20.5.2 figure13. Its used to verify the removabil...
..., etc. may cause a flame, which may then be directed to nearby parts. The needle flame test simulates the internal part of the product. A small flame is generated under fault conditions and the risk of ignit...