| Sign In | Join Free | My burrillandco.com |
|
...Test Apparatus Impact Testing Machine Product details: This testing device confirms to the standards of IEC60598.1 and IEC60950.1. It is applicable for the impact performance test of the equipment enclosure....
... (IP code)> Fig 2, IEC60598-1-2008 and etc. It artificially simulates the dust environment to test the dust-proof ability of the test samples. The test device is suitable for electrical products’ sand and du...
...Test Apparatus Product information: This test device conforms to the standard requirement of GB/T2951.31.9-2008. It is applicable for the PVC wire and cable to do the winding test before the split test in th...
... of protection provided by enclosure (IP code)> Fig 2, IEC60598-1-2008 and etc. It artificially simulates the dust environment to test the dust-proof ability of the test samples. The test device is suitable ...
... and IEC60884-1fig22-26. It is used for the mechanical strength test of households and similar use of plug sockets, electrical accessories like switches and shrouds, etc. Standard of Impact Testing Equipment...
...Testing Machine Torque 0.10Nm Tensile Strength Testing Machine Product introduction:Product Introduction HC9918 soft cable torque test device has become a powerful assistant in the field of soft cable testin...
...Testing Machine for IEC & GB Standards High-accuracy shock test system for components and assemblies with precise, repeatable impact waveforms for reliable product testing. Product Introduction The Mechanica...
... V.4 applied in any direction relative to the opening: − with a force up to 45 N for a strip-cut type device; and − with a force up to 90 N for a cross-cut type device. Test Finger Probe NOTE Media destructi...
...splashing water. The water pressure can be adjusted using the flow control knob on the device to give the required flow rate. The pressure can be seen on the gauge which is conveniently positioned by the noz...
... 8.15.1 for handlamps having a handle or shell of flexible material, such as rubber or polychloroprene, compliance shall be checked by the following test. The parts of the handlamp which are gripped in norma...
... and Structure The test device is suitable for electrical products’ sand and dust test of first characteristic numeral 5 and 6 (IP5 and IP6). It is used to test sealing parts and enclosure’s sand and dust re...
... for refrigerating appliances, ice-cream appliances and ice-makersclause clause 22.7. Features: This computer control air seal pressure test device, can complete the low and high pressure testing. Computer s...
... of IEC 60598-2-8 clause 8.16.1 for handlamps having a handle or shell of flexible material, such as rubber or polychloroprene, compliance shall be checked by the following test. The parts of the handlamp wh...
...Test Apparatus Impact Testing Machine Product details: This testing device confirms to the standards of IEC60598.1 and IEC60950.1. It is applicable for the impact performance test of the equipment enclosure....
...Testing Equipment IEC 60529 IPX8 Water Immersion Test 500mm Diameter Product introduction: The HC-IPX8 waterproof test device, created by the source manufacturer HongCe, protects the waterproof reliability o...
... Waste Disposal Unit Test Probe 31 for IEC 61032 Figure 14 Hazardous Mechanical Parts Accessibility Testing Product Overview The Food Waste Disposal Unit Test Probe 31 is a precision-designed IEC test device...
... cable length is 2000m, the capacitance of the tested cable is 0.75μF, the test voltage is 22kV, and the test time is 5min; 2. Meet the 35kV/240mm2 cable AC withstand voltage test, the capacitance per unit l...
... of all known major COVID-19 variants (including Delta and Omicron). The test works for both symptomatic and asymptomatic individuals. This product has not been FDA cleared or approved; but has been authoriz...
... of all known major COVID-19 variants (including Delta and Omicron). The test works for both symptomatic and asymptomatic individuals. This product has not been FDA cleared or approved; but has been authoriz...
... cable length is 2000m, the capacitance of the tested cable is 0.75μF, the test voltage is 22kV, and the test time is 5min; 2. Meet the 35kV/240mm2 cable AC withstand voltage test, the capacitance per unit l...