| Sign In | Join Free | My burrillandco.com |
|
... air and the insulated element becomes the medium in this situation. When the level of material rise to the probe, the medium air will be substituted by material, so the dielectric constant would be changed....
... air and the insulated element becomes the medium in this situation. When the level of material rise to the probe, the medium air will be substituted by material, so the dielectric constant would be changed....
...the insulated element becomes the medium in this situation. When the level of material rise to the probe, the medium air will be substituted by material, so the dielectric constant would be changed. As the d...
.... XLPE has very high insulation resistance, stable dielectric constant and low dielectric constant at all frequencies. Features and advantages of XLPE wire and cable: In terms of flexibility, polyethylene ca...
... resistance to wear Electrical Properties Dielectric constant (ε) 0-106Hz 3x1010Hz 3.7 3.81 Dielectric strength in kV/cm 20°C 500°C 250-400 40-50 Dielectric loss angle (tg δ) 1KHz 1MHz-109Hz 3x1010Hz <5x10-4 <1x10-4 <4x10-4 Resistivity in Ω·cm 20°C...
... RT/duroid 6010LM microwave laminates are ceramic-PTFE composites which are designed for electronic and microwave circuit applications requiring a high dielectric constant. It's available with a dielectric c...
... a high dielectric constant. RT/duroid 6006 laminate is available with a dielectric constant value of 6.15. RT/duroid 6006 microwave laminates feature ease of fabrication and stability in use. This property ...
... while enabling designers to fine-tune cost and performance. With a dielectric constant of 3 and a loss tangent of 0.0028 at 10 GHz, it also boasts a low thermal coefficient of dielectric constant (TCDk) of ...
..., PTFE-based composites. This unique composition enables a stable, lower dielectric constant by reducing the number of fiberglass plies and increasing the PTFE content. As a result, it supports wider line wi...
... with glass fiber. They offer controlled dielectric constant, low loss performance, and excellent passive intermodulation (PIM) performance. The woven glass reinforcement ensures good circuit processability ...
... (Dk) and dissipation factors (Df), making them ideal for applications like filters, couplers, and low noise amplifiers that require precise dielectric constant uniformity. They are also suitable for power d...
... properties for a wide range of applications. It utilizes a unique composition of woven fiberglass and a higher ratio of PTFE content, resulting in reduced dielectric constants (Dk) and dissipation factors c...
... to meet high dielectric constant requirements, it offers an array of impressive features and benefits that set it apart from the competition. The RT/duroid 6010.2LM laminates provide high dielectric constan...
... material provides a stable dielectric constant (Dk) over a wide range of temperatures, eliminating the Dk step change that can occur in PTFE glass materials near room temperature. Key Features: Dielectric c...
.... It offers a low dielectric constant (Dk) of 2.33 with tight tolerance, making it well-suited for high frequency and broadband applications where low dispersion and losses need to be minimized. RT duroid 58...
...specifically designed to provide a lower dielectric constant for printed circuit board substrates. With precise control over the fiberglass/PTFE ratio, DiClad 880 laminates not only achieve a lower dielectri...
... (Dk) of 2.17 or 2.20, IsoClad 917 laminates utilize a low ratio of non-woven fiberglass to achieve the lowest dielectric constant and dissipation factor available in its class. This unique formulation allow...
... provides exceptional dimensional stability and ease of handling for multilayer circuits. Key Features: Dielectric Constant: 10.2 ± 0.3 at 10GHz Dissipation Factor: 0.0025 at 10GHz High Thermal Conductivity:...
... reinforced with glass microfibers, this PCB guarantees exceptional dielectric constant uniformity, ensuring reliable performance across a wide frequency range. Key Features: Dielectric Constant: 2.2 with a ...
... Production Capacity 100 Pieces /Year Product Description XHYS101 insulating oil dielectric loss tester is mainly used for power equipment insulation in the liquid, dielectric constant and dielectric loss va...