| Sign In | Join Free | My burrillandco.com |
|
..., IEC 60884-1 2013 clause 14.23.2, IEC60065 clause 15.4.1 and figure 11, etc. This device is used to check the torque applied to the output socket after the device with the plug inserted into the fixed outpu...
...Plug Torque Force Test Product Information for Strain Relief Test Apparatus: This apparatus conforms to IEC 60335-1 clause 22.3, IEC60065:2014 clause 15.4.1 and figure 11, IEC 60884-1 2013 clause 14.23.2, IE...
...Figure 41 Apparatus for Pressure Test at High Temperature Standard: IEC 60884-1 2013 clause 30.1 figure 41. Application: is used to test the heat resistance of the insulation material. Test sample: Plug and ...
...ch occurs when the Direct Plug-in Equipment with plug pin normally insert into the socket is in the required range. A device provided with pins intended to be introduced into fixed socket-outlets shall not ....
IEC60884-1 Fig 44 Clause 19 Temperature Rise Test Equipment 0 - 150 Product Introduction This device is in accordance with IEC60884-1 Fig 44 Clause 19 of the temperature rise to design and manufacture, it is m...
IEC60065:2014 clause 12.5 Figure 9 Test Plug For Mechanical Tests On Antenna Coaxial Sockets Standard: IEC60065:2014 clause 12.5 Figure 9. Application: It is used to test the antenna coaxial socket which is ins...
Product Name 80*40mm screws plastic Expansion wall anchor Product Introduction Specification of wall plug. We have many sizes and colors for you to choose from, as shown in the figure. About colors, we have whi...
Temperature Rising Tester Product details: The device is made and manufactured according to the related standard requirement of temperature rising, such as IEC 60884 2006 (Figure 44), VDE0620 etc. It is appli...
Iec60884 Clause 14.23.2 Socket -Outlet Torque Tester Product information The tester is conforms to IEC 60884-1 2013 clause 14.23.2, IEC 60335-1 clause 22.3, IEC60065 clause 15.4.1 and figure 11 and so on . It i...
IEC60884clause 12.14 testing equipment of Lateral Strain for socket-outlets with 5N weight Standard: IEC 60884-1 2013 clause 13.14 figure 13 Application: This device is use to check whether any damage to the s...
IEC60884 Clause 24.4 Testing Device For Checking The Impact Resistance At Low Temperature Test Apparatus Standard: IEC 60884-1 2013 clause 24.4, 30.4, figure 27 and 42, IEC60811-1-4, VDE0620 and so on Applicati...
IEC60884clause 12.14 testing equipment of Lateral Strain for socket-outlets with 5N weight Standard: IEC 60884-1 2013 clause 13.14 figure 13 Application: This device is use to check whether any damage to the s...
...Plug-Socket Endurance Tester SLT-2 Product overview: This device complies with standard terms of 20, 21 in IEC884-1(figure 16) and IEC60669-1 as well as IEC61058-1. It is used for the on-off ability test and...
... for 10,000 flexing at a rate of 60 flexing per minute. Six cables or cords fitted with plugs can be tested simultaneously. The cables are connected to a socket and the tail of the cable is connected to the ...
... for 10,000 flexing at a rate of 60 flexing per minute. Six cables or cords fitted with plugs can be tested simultaneously. The cables are connected to a socket and the tail of the cable is connected to the ...
...Figure 15 Turning Moment Gauge Transversal stress test gauge (BS1363-2 Figure 15): By simulating the bolt to insert into the socket test samples and imposing the prescribed weight force (poise) at the stated...
... undue strain on these socket-outlets. Compliance is checked by engaging the device, as during intended use, with the socket-outlet of a test apparatus as shown in figure 11. The balancing arm of the test ap...
... 101, and IEC60320-1 clause 14.2 figure B.1. It is intended for checking the weight of the protective measures against liquid overflow to ensure that the structure of the plug-in connector (cordless electric...
... of the plug socket for household and similar use. The specific measuring gauges are made according to following: Serial No. Name Figure No. Standard Quantity a Go Gauge for Socket-Outlet Figure 11 BS 1363-2...
...15 clause 15.2 figure 101, and IEC60320-1 clause 14.2 figure B.1. It is intended for checking the weight of the protective measures against liquid overflow to ensure that the structure of the plug-in connect...