Total 10009 products for hardness test apparatus Manufacture & Suppliers

• 220V Vacuum Cleaner Test Apparatus 10r/ Min IEC60335-2-24 For Flexing Resistance

  

  ....103 and figure 102 2. Application: for testing the resistance to flexing of current-carry hose of vacuum cleaner 3. Introduction Curreny-carrying hose flexing resistance test apparatus is designed according...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Connectors 30ML Spillage Test Apparatus IEC60335-2-15 With Spillage Prtoection

  

  ... with spillage protection to ensure that the connectors are not affected by liquids when installed in a rated voltage base according to the manufacturer’s installation instructions. the spillage test is...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Figure 101 Splash Test Apparatus IEC60335-2-75 0.4Mpa For Cookware Oven

  

  ..., IEC60335-2-64 clause 15.1.1 and 15.1.2, GB4706.38 and GB4706.52. It’s used for the splash test of the appliance of the professional type classified IPX1, IPX2, IPX3 and IPX4. The whole device is made of al...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Ground Recessed Luminaires Torque Load Test Apparatus IEC60598-2-13 Figure 13.6.2.1

  

  ...Test Apparatus 1. Introduction The ground recessed luminaires torque load test apparatus is designed according to IEC60598-2-13 figure 13.6.2.1 “torque test”. Parts of luminaire that may be subjected to rota...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Manual 300N Compression Test Apparatus Plug Socket Test Equipment

  

  ... socket-outlet is then pressed between two flat surfaces with a force of 150 N for 5 min, as shown in figure 8. The specimen is checked 15 min after removal from the test apparatus, and shall not show...

  HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Hand-Operated 0.14J to 1J Universal Spring Hammer Test Apparatus IEC62262

  

  ... (0.7J) and IK06 (1J) tests. It can meet the test requirements of IEC62262 and IEC60068-2-75. The spring hammer consists of the body, the striking element and the release system. The striking element for sev...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 2J to 50J Pendulum Hammer Mechanical Impact Test Apparatus IEC62262

  

  ...Mechanical Impact Test Apparatus IEC62262 1. Introduction The pendulum hammer mechanical impact test apparatus can meet the test requirements of IEC60068-2-75 and IEC62262. The equipment consists of striking...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Lateral Pull Test Apparatus for Testing Appliance Couplers as per IEC60320-1

  

  Appliance Couplers Lateral Pull Test Apparatus 1. Introduction The appliance couplers lateral pull test apparatus is designed to meet the test requirements of IEC60320-1 clause 23.3 and figure 8 to verify if th...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Cable Static Flexibility Test Apparatus IEC60227-2

  

  Cable Static Flexibility Test Apparatus IEC60227-2 1. Introduction The static flexibility test apparatus is designed to meet the test requirements of IEC60227-2 clause 3.5 and GB/T5023.2 clause 3.5 for testing ...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• PLC Control IEC60112 Standard Tracking Index Test Apparatus with 220V/50Hz Power and 12 Months Warranty

  

  ...-1 clause 8.9.1.7, IEC60335-1 clause 29, IEC61010-1 clause 6.7.1.3, IEC60884-1 clause 28.2, and BS1363-1 clause 8.2 Appendix C. It is widely used in material testing on lamps, household appliances, IT/AV app...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC60320-1 Compliant Lateral Pull Test Apparatus with PLC+5 Inch Touch Screen Control for 6N/35N/50N Pull Force Testing

  

  Appliance Couplers Lateral Pull Test Apparatus 1. Introduction The appliance couplers lateral pull test apparatus is designed to meet the test requirements of IEC60320-1 clause 23.3 and figure 8 to verify if th...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Vertical Burning Test Apparatus with 1100° Temperature Resistance and 9mm Copper Block for IEC 60332 Compliance

  

  Vertical Burning Test Apparatus for Single Wire & Cable | Flammability Testing Equipment for IEC & UL Compliance Product introduction: Vertical Burning Test Apparatus is a professional flammability testing solu...

  HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC60227-2 Compliant Cable Static Flexibility Test Apparatus with 220V 50/60Hz Input and ≤1.0m Horizontal Moveable Distance

  

  .../T5023.2 clause 3.5 for testing the flexibility of cables with conductor cross-sectional areas ≥2.5mm2. 2. Specification Working Power AC220V, 50Hz/60Hz Control units ......

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC60335-2-2 Compliant Crushing Test Apparatus with 1.5KN Max Crushing Pressure and 50mm/min Pressurization Speed for Current-Carrying Hose

  

  Crushing Test Apparatus for Testing the Mechanical Strength of Current-Carrying Hose as Per IEC60335-2-2 Introduction The current-carrying hose test apparatus is designed to meet the test requirements of IEC603...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC60851-3 Enamelled Round Wire Jerk Test Apparatus Max Operating Pressure 0.8Mpa

  

  ...figure 5. It’s used to test the film adhesion properties of enameled round wires with a nominal conductor diameter up to and including 1.000 mm. A straight piece of wire shall be rapidly stretched to the bre...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC60851-3 Enamelled Round Wire Peer Test Apparatus Input power AC 220V±10% 50Hz

  

  ...It’s used to test the film adhesion properties of enameled round wires with a nominal conductor diameter over 1.000 mm. A straight piece of wire shall be placed in the test equipment consisting of two fixing...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Electric Vehicle Single Station Plugs Connectors Misalignment Test Apparatus IEC62196-3

  

  ... 18. Equipment Overview During temperature rise test, immediately following temperature stabilization, the accessories are subjected to external mechanical loads as illustrated in Figure 18. Using a force ga...

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC 60702-1 Clause 13.6 Electric Vehicle Cables Bending Test Apparatus

  

  ... to the standard requirement of IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their re...

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• EVSE Tracking Index Test Apparatus CTI PTI IEC 61851-1 PLC Control

  

  ...Testing Equipment CTI PTI Tracking Test Apparatus Complied Standards & Clauses IEC/CDV 61851-1 "Electric vehicle conductive charging system - Part 1: General requirements" clause 12.3 IEC 60112 “Method for t...

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• EV Plug Durability Tester Vehicle Charging Connector Flexibility Testing Apparatus

  

  ... 26.4 table 14, IEC60309-1: 2012 clause 24.4 figure 9, etc. Equipment Structure It is used to process the mechanical load flexing test of the vehicle plugs, socket-outlets and couplers non-rewireable accesso...

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier