| Sign In | Join Free | My burrillandco.com |
|
...h 60 000 bending cycles, i.e. 120 000 single strokes, interruption of the current shall not occur. Cable Testing Equipment After the test, the sample shall withstand the voltage test carried out in accordanc...
... the handle bears a force of 100N, and there should be no failure in the joints such as riveting and welding. Applied standard: The design of the handle bending strength test apparatus of cookware complies w...
IEC 60598-1 5J Striking Elements Pendulum Impact Test Apparatus Equipment Overview This test apparatus is used for the impact resistance test of household and similar electronic and electrical products and thei...
...-1: 2020 clause 26.4 figure 20, IEC60309-1: 2012 clause 24.4 figure 9, etc. It is used to process the mechanical load flexing test of the vehicle plugs, socket-outlets and couplers non-rewireable accessories...
IEC 62196-1 New Energy Vehicle Socket Withdrawal Force Test Apparatus Product overview: This withdrawal force test apparatus is required by IEC 62196-1Ed.4CDV 2020 clause 16.16. Test principle: The fixed access...
... Energy Pendulum Hammer Impact Test Apparatus Product overview: This High Energy Pendulum Hammer Impact Test Apparatus is a high-energy pendulum impact tester used for mechanical strength testing of househol...
... Test Apparatus Product Introduction: The IK07-IK10 Mechanical Vertical Impact Test Apparatus is designed and manufactured according to the standard requirements of IEC60068-2-75, IEC60598-1, IEC62262 and et...
... clause 4.7.3, IEC60065:2014 clause 14.1, 20.2.1, 20.2.4, Annex G, IEC60335-1 clause 30, etc. It is also applicable in the horizontal, vertical flammability test of the relative combustion characteristic of ...
...Test Apparatus Production Information: This Insulation Surface Scratch Resistance Test Apparatus meets the requirements of IEC 62368-1 clause 5.4.1.5.3, IEC 60335-2-78:31; IEC 60335-2-95:31; IEC 60335-2-97:3...
... Test Apparatus Product information: This Tensile Strength and Elongation Test Apparatus is designed and manufactured according to the standard requirement of IEC 62368-1:2018 Annex C, Annex G.5, clause Y.4....
...IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the ......
....5, IEC60884-1, IEC60598-1, etc. It is used to check whether the cord anchorage of the household appliances’ power cord is firm, can process the pull force and torque testing....
... rise test, immediately following temperature stabilization, the accessories are subjected to external mechanical loads as illustrated in Figure 18. Using a force gauge, ......
... 60950:2013 clause 1.7.11, IEC 60669-1 clause 8.9, etc. It is suitable for all kinds of plastic injection, silk screen surface for abrasion test, such as: computer, mobile phone (PDA), MP3, CD/VCD/DVD, cordl...
....5, IEC60884-1, IEC60598-1, etc. It is used to check whether the cord anchorage of the household appliances’ power cord is firm, can process the pull force and torque testing. It...
...Test Apparatus With PLC Control Product overview For Glow Wire Flammability And Temperature Test Apparatus: This device is manufactured according to the standard of IEC60695-2-10, IEC 60695-2-11, IEC 60695-2...
... 22.32, IS: 9968 (Part 1 & 2), IS: 6380, IS: 10810-16, etc. Application:It is applicable for the aging test of the electric wire, the insulation layer and sheath of the rubber (plastic, artificial leather) a...
...2022 Cord Retention Testing Apparatus For The Effectiveness Of Cable Product Information For Cord Retention Testing Apparatus: This device conforms to the standard requirement of IEC 60884:2022 clause 23.2 f...
...-1: 2022 clause 33. The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable .....
IEC60335-2-14 High Quality Testing Equipment Defrosting Test Apparatus SN1124 Product Information: The apparatus for water evaporation for accumulation of frost is designed in accordance with IEC 60335-2-24 cla...