| Sign In | Join Free | My burrillandco.com |
|
... Tester Product Introduction Horizontal and Vertical Flammability Testing Machine UL 94 flame chamber. Horizontal flame chamber, vertical flame chamber For the flammability testing of plastic materials used ...
... of droplets under flame conditions. Compliant with standards: Complies with the testing standards of GB/T18380.11-2008, GB/T18380.12-2008, GB/T18380.13-2008, IEC60332-1-1:2004, ......
... 1615/1616,CA TB117,ASTM D6413,ISO6940/6941,EN 14878,EN 1103. Technical Parameters: Combustion test box: 329x329x767mm, the top of the box is evenly arranged with 6...
...). "FR" stands for "flame retardant", and does not denote that the material complies with the standard UL94V-0 unless testing is performed to UL 94, Vertical Flame testing in Section 8 at a compliant lab. Th...
... fabric flame retardant performance and fabric surface flame spread performance, the test method is within the stipulated time, to standardize the flame was carried out on the sample surface combustion, the ...
... fabric flame retardant performance and fabric surface flame spread performance, the test method is within the stipulated time, to standardize the flame was carried out on the sample surface combustion, the ...
...the testing of electrical products. The test measures the burning rate of samples positioned either horizontally or vertically. It conforms to all five UL 94 horizontal and vertical burner tests and associat...
... standard, and has been approved by Guangzhou Meihua UL company, and meets the VW-1 (V-ertical-specimen) Flame Test combustion test standard. It is applicable to the VW-1 of UL1581, UL13, UL444 and UL1655 an...
... standard, and has been approved by Guangzhou Meihua UL company, and meets the VW-1 (V-ertical-specimen) Flame Test combustion test standard. It is applicable to the VW-1 of UL1581, UL13, UL444 and UL1655 an...
... to detect vertically mounted under specified conditions for vertical flame spread inhibiting the ability of bundle cable or fiber optic cable. In accordance with IEC60332—3—10: 2009<Tests on electric and optical fiber cables under fire conditions -...
...standards for BS 476-7, the method of the test to determine the classification of the surface spread of flame of products. BS 476-7 is mainly used for the determination of the extension of the flame which on...
..., primarily for fire protection performance evaluation of the walls and ceilings, measurement results are expressed as an index of flame propagation. During the test, the specimen is exposed to the tubular t...
...the standards for BS 476-7, the method of the test to determine the classification of the surface spread of flame of products. BS476-7 Direct Flame Impingement Building Material Flammability Tester is mainly...
...Testing IEC60695 Needle Flame Tester Introduction: NFT IEC60695 Needle Flame Tester uses a Φ0.9mm needle burner, use butane as gas source, burn the specimen at 45 ° angle. Then according to the specimen is i...
... IEC 60695 UL94 ASTM D635 is a top-of-the-line product in the Flame Test Equipment category. This Horizontal Flammability Testing Equipment is designed to meet the requirements of various international stand...
... cables, flame retardant flame retardant cable connector test. Technical parameters: 1. Combustion box size: W1100 × D500 × H900mm, about 0.5m3, the front door is a transparent glass window; 2. Electric ......
..., layered, laminated products, and similar combinations) of clothing, drapes, valance and large tents, including Arbor and cover textile vertical flame spread properties determination. For evaluation under c...
...flame height:5-40mm can adjust burning time:0-999.99s balance flame time:0-999.99s resolution of burning time :0.01s resolution of balance flame time:0.01s burner angle adjust:0-45 degree front- back of burn...
... and optical fiber cables under fire conditions-Part 1-2: Test for vertical flame propagation for a single insulated wire or cable>. Obtain and determine wire and cable’s capability of prevent the fire from ...