| Sign In | Join Free | My burrillandco.com |
|
YYF023 Halogen Acid Gas Release Test Apparatus Front view of testing apparatus Side view showing components Control panel and interface Detailed component view...
Plastic Ignition Temperature Test Apparatus High Precision Polymer Ignition Temperature Tester Compliant with ASTM D1929, GB/T4610, and ISO871 Standards This Plastic Ignition Temperature Test Apparatus determin...
... paths in solid insulating materials, due to the electric stress and electrolytic contamination of the surface. This test is complex and the person performing it should be accurate and maintain good cleanlin...
... ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advan...
... paths in solid insulating materials, due to the electric stress and electrolytic contamination of the surface. This test is complex and the person performing it should be accurate and maintain good cleanlin...
...Test Apparatus ---- Model XP-2 Introduction: XP-2 ASTM D2843 Exit Sign Tester, Exit Sign Test Apparatus is designed and manufactured in accordance with ASTM D2843 standard , it is mainly for building product...
IEC245-4 Cable Testing Equipment Rubber Electric Wire Abrasion Test Apparatus Product information: This device conforms to the standard requirement of IEC245-4. It is used for the abrasion test of the rubber in...
Reel Test Apparatus Put the dabber on the chuck, then lock Put the test round-wire inserted to dabber’s hole Add corresponding mass on wire , Make the wire bear the tension exactly to touch with the ......
...Test Machine Overview Product description This Cold bend test apparatus is used to measure the dynamic bending performance of wire and cable under low temperature conditions, and is suitable for outer diamet...
...test apparatus for swivel connection-Skin or Hair Care Appliance Standard: IEC60335-2-23 clause 11.101 of Household and similar electrical appliances – Safety: Part 2-23: Particular requirements for applianc...
4 Station Flexing Test Apparatus Instrument Introduction 1.1 Main uses This instrument is mainly used to test the flexural fatigue strength of AC power cords and plug leads. It is suitable for rocking motion te...
... and function: The device is used for the standard IEC60745-2-6 Figure 103. Load the electric hammer or electric drill to make it run intermittently, and test the electric hammer or...
...Test apparatus for material for rail train Description ASTM E162 is one most widely used test standard to evaluate the propagation properties of material in USA. The heat resource use gas radiant panel heati...
... for the mechanical strength test of blankets 1. Introduction The blankets mechanical strength test apparatus is designed according to IEC60335-2-17 clause 21.102 and Annex BB.1 to BB.3. It’s used for mechan...
...Test Apparatus For Fire Hazard Testing - Touch Screen Operation Introduction: The best method for testing electrotechnical products with regard to fire hazard is to duplicate exactly the conditions occurring...
... of IEC 60598-2-8 clause 8.16.1 for handlamps having a handle or shell of flexible material, such as rubber or polychloroprene, compliance shall be checked by the following test. The parts of the handlamp wh...
... cross-section having an external diameter up to and including 12.5 mm and for sector-shaped cores when it is not possible to prepare dumb-bells. Cable Testing Equipment If required by the standard for the t...
...Part 1: General requirements Clause 23.3 and 25.14. Application of Home Appliance Testing Equipment: It is used to check that the supply cord of the small household appliances (such as Coffee pot / electric ...
...essential flammability test equipment intended to determine the burning rating of plastic materials used for parts in devices and appliances under specified conditions. It can help users grasp the ......
... 16 figure12 standard requirement. Application with Tensile Strength Testing Machine: This device is mainly used to ascertain the maximum force necessary to withdraw the connector from the appliance inlet a...