| Sign In | Join Free | My burrillandco.com |
|
...-rolled onto the steel. The dimension can match with all other accessories. Tie rod can be welded in common conditions. For tie rod Ø15/17, working load is...
...-rolled onto the steel. The dimension can match with all other accessories. Tie rod can be welded in common conditions. For tie rod Ø15/17, working load is...
Introduction Used in proof load and breaking load test for anchor chains, chains accessories, shackle, slings, marine anchor, high strength steel wire rope, fishing ......
Load Box For Lab Equipment Testing Product overview: This load box is designed and manufactured according to IEC60884,IEC61058,IEC606691 standards and etc. It is used for the on-off ability test and the normal ...
Load Box For Lab Equipment Testing Product overview: This load box is designed and manufactured according to IEC60884,IEC61058,IEC606691 standards and etc. It is used for the on-off ability test and the normal ...
...Application: This device is used for household and similar purpose fixed electrical appliance switch, plug and socket, coupler for on-off ability, breaking capacity and normal operation life test. Test sampl...
... load boxes are designed and manufactured according to IEC60884, IEC61058, IEC606691 standards and etc. It is applicable for household and similar fixed electrical installations switches and plug sockets bre...
...IEC60884, IEC61058, IEC606691 standards and etc. It is applicable for household and similar fixed electrical installations switches and plug sockets breaking capacity and normal operation test, the rated vol...
... of automatic loading table, automatic cutting table and air-floated breaking table. 1.CY-SP-6133 Fully automatic glass loading table It is mainly used for automatic glass loading. After putting the glass in...
...break isoaltor disconnect switch disconnector (GW7B-252) Product Description GW7B isolating switch is a kind of outdoor HV electricity transmission equipments at three-phase AC frequency of 50/60Hz. It is us...
... of 50Hz/60Hz. It is used for breaking or connecting HV lines under no loads so that the power lines can be changed and connected and the way the electricity runs is changed. In addition, it can be used to e...
... of 50/60Hz. It is used for breaking or connecting HV lines under no loads so that these lines can be changed and connected and the way the electricity runs is changed. Quick Details: In addition, it can be ...
...Break Disconnect Switch Substation isolator Disconnector (GW7B-145) Product Description General GW7B isolating switch is a kind of outdoor HV electricity transmission equipments at three-phase AC frequency o...
... our backhoe loader is 4 wheel drive.Besides the places that the backhoe loader can be used,our 4 wheel drive backhoe loader equipped with hydraulic breaking hammer can be used to break building concrete, bo...
... snubber assembly to protect drill pipe connectors when making up and breaking out connections. • The body, the bail, and the bail support are cast with special alloy steel. • The primary load carrying parts...
... type. High breaking strength over 2.5g/d, the average Oxygen over than 28%. No Burning when the fire is removed. No dropping after burning, and very low smoke. Features: Best material property,low-smoke,bes...
...Loading Asphalt/Crude Oil Bottom Loading Emergency Shut off Valve for Fuel Tank Truck The emergency shut-off valve, also known as the underwater valve, is installed at the bottom of tank cars. Designed for m...
... at the bottom of the tank car. The valve is sealed inside the tank with no cut-off groove on the valve body. When subjected to strong collision, the valve body breaks at the flange, separating the tank body...
...Breaking Strength 8200KG for Pulling Product Overview The 20mm Heavy-Duty Double Braided Nylon Rope is engineered for maximum strength and durability, with a breaking strength of 8200KG. Designed for industr...