| Sign In | Join Free | My burrillandco.com |
|
Paint Film Flexibility Tester Paint Testing Equipment Description: The flexibility of the paint film is evaluated by its ability to deform with the substrate without damage under the specified standard conditio...
...Paint Testing Equipment Description: The multi groove film applicator is designed to apply uniform paints, adhesives and similar products on flat substrates. Biuged combines the diversity of multi groove fil...
Paint Film Drying Time Measuring Meter Paint Testing Equipment Standard: GB/T 1728 Description: Design according to GB / T 1728: place a certain filter paper on the surface of the film to be tested, and then pl...
... rod, and clamp the fixing plate. → bend the test plate along the conical axis with the manual operating lever → bend the sample 180 degrees with uniform force within 15 seconds → remove the paper and check ...
... film, and observe whether the putty film has cracks or falls off. The minimum diameter of the curved arc is mm. It is suitable for measuring the flexibility of thick paint putty.Paint Testing Equipment Spec...
...Paint Testing Equipment Description: Designed according to ISO 2431 and GB / T 6753.4, it is an internationally used viscosity tool for testing liquid samples. It is suitable for measuring the outflow time o...
Paint Impact Tester High-Quality Paint Testing Equipment Standard: GB/T 1732 Description: This is a simple, economical and practical paint film impactor, which is suitable for coating on tinplate with thickness...
Paint Film Completely Drying Time Measuring Meter Paint Testing Equipment Standard: GB/T 37362.1-2019和ISO 9117.1-2009 Description: Designed and manufactured according to the latest national standards GB / T 373...
Paint Film Drying Time Measuring Meter Automatic Paint Testing Equipment Standard: GB/T 1728 Description: Suitable for measuring the drying time of paint film and putty film. The coating film formed by various ...
... on the paint film is used to express the hardness of the paint film. It is based on the principle that when the swing rod contacting the surface of the paint film swings with a certain period, the softer th...
... of the tested sample ◆ integrated infrared probe to test sample temperature, no need to clean more convenient ◆ the rotor is connected by magnetic suction, which is convenient for disassembly and cleaning ◆...
...-A linear drying time tester can measure 6 samples at the same time, saving measurement time; QGZ-A has three different speeds of 6-12-24h.Paint Testing Equipment Specification:...
... Applicator Paint Testing Equipment Description: JFA - Ⅱ jig coating machine is designed to enable the operator to easily coat accurate wet films on different substrates, greatly improving the reproducibilit...
...Paint Testing Equipment Standard: ISO 7784-2,ISO 9352,GB/T 1768,ASTM D 3884,ASTM D 1175 Features: ◆ a variety of different wear media and accessories can be selected for different tests. ◆ two speeds (60 rpm...
...Paint Testing Equipment Standard: GB/T6739-2006,ASTMD3363,ISO15184,BS3900-E19,ECCA-T4/1,JIS,CNS Features: Scratch the coating surface with a hardness pencil to test the surface hardness of the coating layer....
... are mainly related to the hardness of the coating. The hardness of the paint film is one of the important properties indicating the mechanical strength of the paint film, and is an important indicator to me...
Paint Film Swing Hardness Scale Paint Testing Equipment Standard: GB / t1730 iso1552 Description: It is manufactured according to GB / t1730 and iso1552 standards and is used to determine the deformation ......
Specific Gravity Cup Paint Testing Equipment Operation steps: → weigh and record the weight of the clean density cup → adjust the density cup and the sample to be tested to the temperature required by the test...
... of dry or wet films. During routine quality control and research and development tests, the coating shall have good consistency and repeatability in covering power, opacity, scrub resistance, sagging resist...
...Paint Testing Equipment Standard: GB/T6739-2006,ASTMD3363,ISO15184,BS3900-E19,ECCA-T4/1,JIS,CNS Features: Scratch the coating surface with a hardness pencil to test the surface hardness of the coating layer....