Total 18185 products for radiographic testing method Manufacture & Suppliers

• Single Combustion Testing Machine For Building Materials Or Products A Method Used To Determine The Fire Response Performance Of Building Materials Or Products

  

  .../EC) in a single burning test (SBI). Ii. Compliance with Standards It complies with the requirements of the GB/T 20284-2006 standard "Test for Single Burning of Building Materials or Products" and ...

  Dongguan Chengfeng Testing Equipment Co., Ltd

  China

  Verified Supplier

  Add to cart

  Contact Supplier

• Distillation method Water Content Tester SY-260A 2200w 430x320x700mm

  

  ... of petroleum products according to the test method specified in GB/T260. It is also suitable to determine the water content of lubricating grease according to the test method specified in GB/T 512 Test Meth...

  Beijing Samyon Instruments Co., Ltd.

  Beijing,China

  Active Member

  Add to cart

  Contact Supplier

• Concrete Shrinkage Deformation Tester Non Contact Method

  

  ... Shrinkage Deformation Tester Concrete Testing Equipment Standard: Non contact method in Standard for Test Methods of Long term Performance and Durability of Ordinary Concrete (GB/T50082-2009); Standard for ...

  Hebei Better United Import And Export Co., Ltd.

  Hebei,China

  Site Member

  Add to cart

  Contact Supplier

• Auto Electrical Safety Test Equipment Flame Resistant Test Glow Wire 999s Burning Time Adjustable

  

  ...-2-10~IEC60695-2-13 (GB/T5169.10-2006~GB/T5169.13-2006), < basic testing methods of Glow wire, basic testing methods of Glow wire device> and UL 746A, IEC829, DIN695, VDE0471 2. Introduction of Glow Wire Tes...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Rain / Spray Waterproof Test Chamber For R1/R2/S1/S2 Test

  

  ... direct contact water pressure: 0.01Mpa, water flow: 1.9L/min, water temperature: ordinary temperature, test time: 10min R2 Auto parts against rain or spray water indirect contact water pressure: 0.03Mpa, wa...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• EV Outdoor Waterproof Testing Performance Vehicle Test Chamber

  

  ...Testing Performance Vehicle Test Chamber Applied Standards QC/T476-2007 “Rain Proof Performance Limit and Test Method for Bus”: Water emerges from gaps, leaves or runs continuously down the interior surface ...

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• ASTM B117 Standard Cyclic Corrosion Test NSS Salt Spray Corrosion Test Machine Price

  

  ...Test NSS Salt Spray Corrosion Test Machine Price Product Description What is metal coating salt spray test chamber? Salt spray corrosion test machine is used to inspect salt corrosion ability of materials an...

  BOTO GROUP LTD

  Shanghai,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 200KG 3.5KW Low Temperature Test Chamber For Wire And Cable

  

  ...Test Equipment Low-Temperature Test Chamber for Wire and cable Standard: IEC60811-1-4 ‘common test methods for insulating and sheathing materials of electric and optical cables-part 1-4:Methods for general a...

  HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 0.1MPa Flammability Testing Equipment

  

  ... hazard testing – Part 11-3: Test flames – 500 W flames – Apparatus and confirmational test Methods’, IEC60695-11-4 ‘Fire hazard testing – Part 11-4: Test flames – 50 W flames – Apparatus and confirmational ...

  HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• High Low Temperature Peel Adhesion Test Equipment 80L 150L Inner Size

  

  ...Test Chamber With Universal Testing Machine Standard GB10586-89 Technical conditions of low-temperature test chamber GB/T7750-1987 Test method for tensile shear creep properties of adhesives GB2423.1-89 Basi...

  GUANGDONG KEJIAN INSTRUMENT CO.,LTD

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• AC220V 50Hz Universal Testing Machines For Tape ISO listed computerized

  

  ...Testing Machines For Tape ISO listed computerized Standard GB10586-89 Technical conditions of low-temperature test chamber GB/T7750-1987 Test method for tensile shear creep properties of adhesives GB2423.1-8...

  GUANGDONG KEJIAN INSTRUMENT CO.,LTD

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 50kg Steel Tensile Strength Testing Equipment , KINSGEO Compression Testing Machine

  

  ... shear creep properties of adhesives GB2423.1-89 Basic environmental test procedures for electrical and electronic products Test A: low-temperature test method GB2423.2-89 Basic environmental test procedures...

  GUANGDONG KEJIAN INSTRUMENT CO.,LTD

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 500mm/Min Universal Tensile Testing Machine Peel Strength Testing Machine

  

  ...Testing Machine Computer Data Analysis Standard GB10586-89 Technical conditions of low-temperature test chamber GB/T7750-1987 Test method for tensile shear creep properties of adhesives GB2423.1-89 Basic env...

  GUANGDONG KEJIAN INSTRUMENT CO.,LTD

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Electronic Components Plastic Testing Equipment IEC 60695 FOR Painting Glow - Wire

  

  ...Test Machine for Electronic Components Usage: Glow-wire Test Apparatus is according to IEC60695-2-1 and 2-10 and Glow wire tester is to test glow wire of lighting lamps, electronic products and household app...

  Dongguan Liyi Environmental Technology Co., Ltd.

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Battery Equipment High And Low Temperature Test Chamber Environment Simulate Battery Testing Lab

  

  ...Test Chamber Environment Simulate Battery Testing Lab 1. Application: This equipment mainly used for battery high low temperature test,temperature change,humidity etc. Environment simulate reliability test. ...

  Shandong Gelon Lib Co., Ltd

  Shandong,China

  Site Member

  Add to cart

  Contact Supplier

• Thermal Shock Environment Electrical Test Equipment IEC60068-2-3 12 Months Warranty

  

  ...Test Equipment from -40℃ to +120℃ 1. Introduction The thermal shock test chamber is divided into two-box type and three-box type. The difference is that the test method and internal structure are different. ...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Programmable Thermal Shock Test Chamber Stainless Steel LCD Touch Screen AC 380V

  

  ...GB- T10592-2008, GJB150.3-198, GJB360A-96 Method 107 2. Introduction of Thermal Shock Test Chamber: The thermal shock test chamber is divided into two-chamber type and three-chamber type. The difference is t...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Three Stations AC220V Cold Elongation Test Machine IEC Test Equipment

  

  ...Test Equipment Cold Elongation Test Equipment with three stations Standard: IEC60811-1-4 common test methods for insulating and sheathing materials of electric and optical cables-part 1-4: Methods for genera...

  HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Manual Control 60811 IEC Test Equipment Cold Bend Testing Apparatus

  

  ... Methods for general application-Test at low temperature clause 8.1 and 8.2 and figure 1. Figure 1 Cold Bend Test Apparatus Application: This test is intended in general for cables with an overall diameter u...

  HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• SUS304 Efficiency Salt Spray Test Chamber with Variable Test Area and Safety Features

  

  ... that evaluates the corrosion resistance of materials and coatings when exposed to a salt spray environment. The test time can range from 48 hours to 1000 hours depending on the needs of the user. The test a...

  BOTO GROUP LTD

  Shanghai,China

  Verified Supplier

  Add to cart

  Contact Supplier