| Sign In | Join Free | My burrillandco.com |
|
...Resistance Test Equipment Product Overview: This current-carrying hoses flexing resistance test equipment meets the standard of IEC60335-2-2, clause 21.103 figure 102. Suitable for verifying the vacuum clean...
...-2-2, clause 21.104. Suitable for verifying the vacuum cleaners or water-suction cleaning appliances's current-carrying hoses shall be resistant to torsion. Test Procesures (Extracted from IEC 60335-2-2 clau...
...Resistance Test Equipment Product Overview: This current-carrying hoses abrasion resistance test equipment meets the standard of IEC60335-2-2, clause 21.102 figure 101. Suitable for verifying the vacuum clea...
...Resistance Test Apparatus Product information: It is used for resistance test to torque of cookware handle. The torsion deformation of the handle in all directions does not exceed 10°. The degree of deformat...
... clause 7.4 and Appendix C, figure C.1. It is used for resistance test to torque of cookware handle. The torsion deformation of the handle in all directions does not exceed 10°. The degree of deformation can...
...2020 clause 7.6 and Appendix E, figure E.1. It is used to perform fatigue resistance test on cookware handles. The handle assembly should withstand 15,000 cycles of operation, and the handle or connecting pa...
Rain Environmental Test Chamber for Enclosure Water Resistance Test PX1/2 Vertical Rain Drop Test 1. Meet the requirement of IEC60529 standard IPX1 vertical rain drop test and IPX2 15inclination rain drop test...
... with tractor during operation, the discs turn the soil by its rotating. Particularly, disc plough is suitable for operating on the field with grasses, straw and stems of crops or plants, big soil resistance...
...Resistance Testing Equipment Alternative name Uppers anti-cutting tester Function Test anti-cutting strength of shoe uppers, gloves Type Table type Weight 57kg Volume 60X20X45cm Corresponding test standard I...
... hard materials. A driving rotation round blade under a specified load cuts the glove held by the fixture of tester to and fro. After test, compare it with its original statuses to get the results. Specifica...
...Resistance Testing Equipment Alternative name Uppers anti-cutting tester Function Test anti-cutting strength of shoe uppers, gloves Type Table type Weight 57kg Volume 60X20X45cm Corresponding test standard I...
... hard materials. A driving rotation round blade under a specified load cuts the glove held by the fixture of tester to and fro. After test, compare it with its original statuses to get the results. Specifica...
...resistance tester is very little. Used four lines.It is quick,stable,high precision for testing the winding resistance. In addition, this winding coil resistance tester set has a strong ability for anti-jamm...
... standards GB/T 22042, GB/T 1410, FZ/T 64013, SJ/10694 Technical Specification Range 1×105 Ω to 1.999×1016 Ω The test voltages DC 100V, 250V, 500V or 1000V Working environment temperature and humidity temper...
...Resistance Tester DIN 53 EN 344 Shoe Boot Abrasion Resistance Testing Equipment Product Description Product Introduction This wear resistance tester is used to measure the wear resistance of rubber on shoe s...
...steaming through the fabric, the thermal resistance and wet resistance of a variety of materials are tested in a stable temperature and humidity environment. Can be used for fabric, film, coating, foam, leat...
...environment, the characteristics of crack-resistant rubber, ozone resistance testing machine, can control and adjust the concentration of ozone environment, to determine the anti-ozone properties of the spec...
...environment, the characteristics of crack-resistant rubber, ozone resistance testing machine, can control and adjust the concentration of ozone environment, to determine the anti-ozone properties of the spec...
... and computer-controlled operation. All standard test procedures and data judgments are controlled by the system, making it easy to operate. It provides AC30~8000A adjustable AC constant current source, whic...
...~IEC60695-2-13 (GB/T5169.10-2006~GB/T5169.13-2006), < basic testing methods of Glow wire, basic testing methods of Glow wire device> and UL 746A, IEC829, DIN695, VDE0471 2. Introduction of Glow Wire Testing ...