| Sign In | Join Free | My burrillandco.com |
|
... is used, and Chinese menu is displayed. Nominal specification, test deformation, test items, printing, testing, uplink, downlink, time, calibration. The menu on LCD is controlled by keyboard, the deformatio...
...Testing Machine(GW-049B) Brief introduction: This Machine is used to test the compression of safety footwear and puncture resistance of shoe sole,safety glove, the instrument will automatically retain test v...
...specification, test times, left-hand, right-hand, time, calibration. The menu on the LCD is controlled by the keyboard, and the test results are printed on board. It fully complies with the test requirements...
...test for triangular edge of suture needle 5.7-inch (120 × 90) LCD is used, and Chinese menu is displayed. Nominal specification, test load, printing, testing, uplink, downlink, time, calibration. The menu on...
...nominal specifications, test times, printing, testing, uplink, downlink, time and other parameters. The menu on the LCD is controlled by the keyboard, and the tested guide wire is bent and straightened in re...
.... Nominal specification, test deformation, print, test, up, down, time, calibration. The keyboard controls the menu on the LCD screen, automatically controls the deformation, prints the test data on board, a...
...specification, test load, print, test, uplink, downlink, time, calibration. The keyboard controls the menu on LCD screen, such as average value, maximum value, minimum value, etc. It is used for fatigue test...
... display. Nominal specification, test deformation, print, test, up, down, time, calibration. The keyboard controls the menu on the LCD screen, automatically controls the deformation, prints the test data on ...
...such movement that drive the toy three times at a steady speed of 2.0±0.2m/s perpendicularly into a non-resilient step with a height of (50±2)mm. Technical specifications Test Sample: Children Ride-on-Toys S...
... The combined temperature and humidity vibration test chamber conforms to national standards and meets specific testing requirements. Through the combination of high and low temperature, low temperature, tem...
...Testing Equipment AATCC Manual Crockmeter Description: AATCC Crockmeter/Rubbing Fastness Tester. To determine colour fastness of textile to dry or wet rubbing, fitted with hand crank/counter. Provided with a...
...such movement that drive the toy three times at a steady speed of 2.0±0.2m/s perpendicularly into a non-resilient step with a height of (50±2)mm. Technical specifications Test Sample: Children Ride-on-Toys S...
...connected to the PC, will test data automatic statistics, the data can be displayed. Advantages: 1. Speciality in testing equipment 2. Various products to choose from 3. Accept customization 4. Excellent aft...
...Testing Equipment Detailed Descriptions: This machine is used to test the upper vamp and shoes materials including leather and lining, water vapor penetration resistance,under the specified 20°C and 65% RH e...
...Testing Machine Leather Air Permeability Tester Detailed Descriptions: This machine is used to test the upper vamp and shoes materials including leather and lining, water vapor penetration resistance,under t...
... The combined temperature and humidity vibration test chamber conforms to national standards and meets specific testing requirements. Through the combination of high and low temperature, low temperature, tem...
...Specific Resistance Tester Digital Specific Resistance Testing Instrument 1.Product Introduction The GA-3A type fiber specific resistance tester is a newly developed digital specific resistance tester. The i...
...Test Chamber,108L 270L Salt Spray Corrosion Test Chamber Salt spray corrosion testing equipmentadapted to the surface treatment of various materials, including paint, electroplating, organic and inorganic co...
...Testing Application: Testing the drilling hole quality of Cast-in-place pile Testing the groove quality of diaphragm wall(D-WALL) Standard: T/CECS 596-2019 Technical specification for testing of borehole of ...
... than 5 ℃ Pinhole diameter: Ø 0.8mm (replaceable) The minimum distance between the nozzle and the sample is 200mm Needle tube spacing: 20mm Test bench speed: (1 ~ 20) R / min (settable) Test bench size: Φ 60...