| Sign In | Join Free | My burrillandco.com |
|
... tube and the relevant auxiliary parameters are recorded by the camera to measure the burning rate of combustible gas. The Combustible Gas Burning Rate Test Apparatus is mainly composed of combustion tube, i...
IEC60335-1 Pin Torque Test Apparatus For Function Of Force Borne By Detection Device Standards and Application For Pin Torque Test Apparatus: The device conforms to IEC60065:2014 clause 15.4.3 b) and c), IEC609...
IEC 60695-11-10 Horizontal And Vertical Burning Test Apparatus With PLC Control Product Information for Horizontal And Vertical Burning Test Apparatus: Standard: IEC60695-11-10, IEC60695-11-20, UL94, IEC60695-1...
Soil Shrinkage Test Apparatus Consists of The Main Part and The Quasi-soil Part Equipment description: Apparatus is used to test moisture content of contracting limit after the specimen lost moisture, linear co...
IEC 60320-1 Clause 14.2 Figure B.1 Steam Sterilizer Moisture Resistance Test Apparatus Product information: The spillage test apparatus is designed and manufactured according to IEC 60335-2-15 clause 15.2 figur...
ISO75-1 ISO306 HDT VICAT softening point test apparatus for thermoplastic materials with four frame Product Description: ISO75-1 ISO306 HDT VICAT softening point test apparatus for thermoplastic materials with ...
ISO75-1 ISO306 HDT VICAT softening point test apparatus for thermoplastic materials with four frame Summary: ISO75-1 ISO306 HDT VICAT softening point test apparatus for thermoplastic materials with four frame i...
Spillage Test Apparatus Validating Electrical Safety Of Refrigerators Product information: The apparatus for spillage test is designed in accordance with IEC 60335-2-15:15.2, 15.102, 15.103;, IEC 60335-2-24 cla...
Ceramic Material Fuchsine & Methylated Spirit Pressure Test Apparatus IEC 60335-1 Product Overview The Ceramic Material Fuchsine and Methylated Spirit Pressure Test Apparatus is designed in full compliance with...
IEC 60335-2-41 Clause 22.101 Hydraulic Pressure Test Apparatus 0.1-2.5MPa Product information: This hydraulic pressure test apparatus is required by IEC 60335-2-3 clause cl.22.7, IEC 60335-2-15:22.7, IEC 60335-...
IEC 60601-1 Annex G.7 Flammable Gas Mixing Test Apparatus Medical Electrical Equipment Product Overview: The Flammable Gas Mixing Test Apparatus is designed to evaluate the explosion and ignition risks of medic...
IEC 61386-1 Clause 10.8 Suspended Load Test Apparatus For Conduit Fittings Product information: The Suspended Load Test Apparatus is designed to rigorously evaluate the mechanical performance of metal, non-meta...
IEC245-4 Cable Testing Equipment Rubber Electric Wire Abrasion Test Apparatus Product information: This device conforms to the standard requirement of IEC245-4. It is used for the abrasion test of the rubber in...
Reel Test Apparatus Put the dabber on the chuck, then lock Put the test round-wire inserted to dabber’s hole Add corresponding mass on wire , Make the wire bear the tension exactly to touch with the ......
...Test Machine Overview Product description This Cold bend test apparatus is used to measure the dynamic bending performance of wire and cable under low temperature conditions, and is suitable for outer diamet...
...test apparatus for swivel connection-Skin or Hair Care Appliance Standard: IEC60335-2-23 clause 11.101 of Household and similar electrical appliances – Safety: Part 2-23: Particular requirements for applianc...
4 Station Flexing Test Apparatus Instrument Introduction 1.1 Main uses This instrument is mainly used to test the flexural fatigue strength of AC power cords and plug leads. It is suitable for rocking motion te...
... and function: The device is used for the standard IEC60745-2-6 Figure 103. Load the electric hammer or electric drill to make it run intermittently, and test the electric hammer or...
...Test apparatus for material for rail train Description ASTM E162 is one most widely used test standard to evaluate the propagation properties of material in USA. The heat resource use gas radiant panel heati...
... for the mechanical strength test of blankets 1. Introduction The blankets mechanical strength test apparatus is designed according to IEC60335-2-17 clause 21.102 and Annex BB.1 to BB.3. It’s used for mechan...