Total 65030 products for standard test blocks Manufacture & Suppliers

• Metal Phased Array Test Block Type A / Ultrasonic Calibration Block

  

  ASTME2491-2013 test block Phased Array Test Block Type A Specifications: ASTME2491-2013 Calibration Functions: The Phased Array ���Type A��� Calibration Block is used during the initial setup and calibration of a p...

  TMTeck Instrument Co., Ltd

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 750 Inch ASME Basic Calibration Block 1018 Steel Nickel Plated Test Block

  

  ...unit Calibration Test Block 1 certification 1 suitcase The drawing: What you can enjoy if buying from us? We provide all the items on our website with 2-years warranty and unlimited technical service. Our ai...

  TMTeck Instrument Co., Ltd

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• NDT Magnetic Flaw Detector Accessories Dead Weight test Block N1

  

  ... The fundamental purpose of testing the lifting force is to test the effective magnetic flux introduced by the yoke into the workpiece, so as to measure the performance of the yoke. Lifting force refers to t...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Chrome Plating AS2083/2005, BS2704/1978/1983 Dye Penetrant Inspection Test Block

  

  ... Test Block A test block with the size of 130mm×40mm×4mm and the material of 0Cr18Ni9Ti or other stainless steel materials was chromium plated on one side, and three radial crack areas were formed by applyin...

  HUATEC GROUP CORPORATION

  Beijing

  Verified Supplier

  Add to cart

  Contact Supplier

• Calibration Test Block Iow Type 2 1018 Steel

  

  ... 1 unit Calibration Test Block 1 certification 1 suitcase The drawing: About US TMTeck Instrument Co., Ltd.(hereafter:TMTeck) is a leading NDT manufacturers and suppliers in Beijing China and provides innova...

  TMTeck Instrument Co., Ltd

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Standard Test Finger IEC61032 Fingertip Length 80mm Test Finger Probe

  

  Standard Test Finger IEC61032 Fingertip Length 80mm Test Finger Probe Product Introduction: In the field of electronic product safety testing, an accurate and reliable tool is the key to ensuring product qualit...

  Guangzhou HongCe Equipment Co., Ltd.

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Ingress Protection Test Equipment IEC 60132 60335 Standard Test Probe Pin Thorn Kit

  

  ...Test Equipment IEC 60132 60335 Standard Test Probe Pin Thorn Kit Product information: The IEC 60132/60335 standard Test Probe Pin Thorn Kit are the necessary items for household and similar electrical applia...

  Guangzhou HongCe Equipment Co., Ltd.

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Ultrasonic Calibration Blocks, Clibration Block for flaw detector, thickness gauge test block

  

  Ultrasonic Calibration Blocks, Clibration Block for flaw detector, thickness gauge test block Order Code Shape (Not to Scale) Type Description /Application Standard Made To Material Size V1 A2 (BS) I.I.W Calibr...

  RAYTECH NDT INSTRUMENT CO.,LTD

  Beijing,China

  Site Member

  Add to cart

  Contact Supplier

• PT Specimen Reference Test Block Type II Ndt Equipment

  

  PT specimen Reference Test Block Type II ISO 3452-3: 2013 describes two types of reference blocks - Type 2 reference blocks are for routine assessment of DPI system performance. Reference block type 2 is made f...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• PSM-5 Five Point Fluorescent Penetration Test Block

  

  ... test block has a rough surface in the sandblasting area, which is used to verify the cleaning performance of the penetrant and the accuracy of the cleaning method. Its sensitivity is determined by the numbe...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• PSM-5 Penetration Comparison Fluorescent Penetration Test Block for Penetrant Sensitivity Verification

  

  ... of the operating process. At the same time, the test block has a rough surface in the sandblasting area, which is used to verify the cleaning performance of the penetrant and the accuracy of the cleaning me...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Iow 1 Test Block Ultrasonic Calibration Block / 1018 Steel Block / Ut Block For Ultrasonic Flaw Detection

  

  IOW 1 Ultrasonic test block Carbon Steel block INCLUDED MAKER CERTIFICATION AND ABS PLASTIC CASE MATERIAL :Carbon Steel /1018 steel Package including Calibration block 1 certificate 1 carrying case 1...

  TMTeck Instrument Co., Ltd

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 5-step wedge test block 2.5-12.5mm calibration copper alloy block

  

  Test block 5-steps copper alloy, thickness 2.5-12.5mm, c/w test certificate Thickness of each step:2.5,5,7.5,10,12.5mm, each step size: 20X20mm...

  TMTeck Instrument Co., Ltd

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 8 Step Wedge Test Block With Case 5-40mm Calibration 1018 Steel

  

  Specifications MM,1018 steel, 10step test block Thickness:5mm,10mm,15mm,20mm,25mm,30mm,35mm, 40mm size:160*20mm Package including 1 unit Calibration Test Block 1 certification 1 suitcase...

  TMTeck Instrument Co., Ltd

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 9 Step Wedge Test Block With Orange Case 0.1-2 Inch Calibration 1018 Steel

  

  Specifications Inch,1018 steel, 9 step test block Thickness:0.1-0.25-0.5-0.75-1-1.25-1.5-1.75-2 inch size:200*20mm Package including 1 unit 1018 Steel 9 steps Calibration Test Block 1 certification 1 suitcase...

  TMTeck Instrument Co., Ltd

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 7 Step Test Block In 1018 Steel Thickness 5mm 12.5mm 20mm 27.5mm 35mm 42.5mm 50mm

  

  ...test block Material:1018 steel step size:20 x 20 mm Thickness:5mm,12.5mm,20mm ,27.5mm,35mm,42.5mm,50mm with certificate and suitcase material step thickness type 1018 steel 5mm,12.5mm,20mm ,27.5mm,35mm,42.5m...

  TMTeck Instrument Co., Ltd

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Asme 19mm Ndt Ultrasonic Test Block /Calibration Block 1018 Steel Block

  

  ASME19mm Basic Test Block Material :1018 steel Package including 1 calibration block 1 certificate 1 block case Our Service 1. Our company's product can be repaired free of charge within two year. Also the prod...

  TMTeck Instrument Co., Ltd

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• UT Test Block NavShip Phased Array 304 Stainless Steel Calibration Block 4 Holes Type

  

  ... of too many holes interfering with one another. This block contains 4 holes at 3/64" diameter drilled through the 1.250" width. The holes are located at .250", .750", 1.750", 2.250" and 2.750". Diameter: 1....

  TMTeck Instrument Co., Ltd

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• NDT IIW-Type 1 AWSD1.1/D1.1M-2015 Calibration Block 1018 Steel Test Block For Ultrasonic Flaw Detector INCH TYPE

  

  NDT IIW-Type 1 AWSD1.1/D1.1M-2015 Calibration Block 1018 steel test block for Ultrasonic Flaw Detector Material: 1018 Steel Weight:6 KG Package Including: 1 unit calibration block 1 suitcase 1 certification The...

  TMTeck Instrument Co., Ltd

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Insulating Material Standard Test Finger for Accessibility Test Thruster 0N-50N

  

  ...accessbility to hazardous parts of electrical and electronic devices. This probe is widely refered by IEC60335-1, IEC62368-1, IEC60598-1 and other products standards. Standard test finger is strictly designe...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier