| Sign In | Join Free | My burrillandco.com |
|
... system designed to safeguard equipment from overvoltage conditions and power surges in low-voltage distributing power systems. This device is specifically engineered for applications where both over-current...
... surges. This technology ensures that your devices are protected from any electrical disturbances that may occur. The enclosure material of this lightening protector is made of thermoplastic UL94-V0, which i...
...t the circuit breaker is open. When the voltage occurs, the impedance drops to a few Europe, and the surge current will flow through the surge protector and will not enter the device. At the same time, becau...
... protection zones. As a series-installed fine arrester at the front end of equipment, it integrates full-mode protection to shield against surges in line-neutral, line-earth, and neutral-earth paths. Equippe...
AC Surge Arrester 40kA Type 2 Surge Protection Device Feature: • Thermal stability 100A without additional protection • Patented fast tripping mechanism • SEMKO approval • Imax 40kA 8/20us • Modular design, sta...
1+2 class 100kA surge protector SPD OBV-I25: Rated voltage(VDC) 240/415Vac Iimp(impulse discharge current for class I test) 20KA In(nominal discharge current for class II test) 20kA Up(voltage protection level)...
...series surge protectors protect against surges affected by indirect lightning and direct lightning The main technical parameters Model and specification U1-II20X Uc(VAC)Maxi continuous operating voltage 750,...
Lower Protection Level 30kA Surge Protector For 320V N-PE System OBV-I30 data: Uc(maximum continuous operating voltage) 320V Up(voltage protection level) ≤1.9kv suitable power system 1-N/E, single phase Respons...
50kA Single Phase 1+1 Type 1 Class I Lightning Surge Protective Device lightning absorber Product Features: 1. Inside over-current and over-heat protection, temperature control open circuit. 2. Module design, c...
...surge voltage protector tvss spd Type 2 surge arrester Type 2 surge arrester Features: Protecting low-voltage consumers' installations against indirect lightning discharges High performance varistor with...
outdoor input in the building and each oor Low voltage(200/380VAC) industrial SPD Model and specification AM40A Model AM40A MainTechnicalData UnNominalworkingvoltage(Un) 230/400V UcMaxcontinuousoperatingvoltag...
... continuous operating voltage (Uc) is 275V. • Nominal discharge surge current (In) is 3kA (8/20µs). • It is a 3-leaded device. • BR275-6-L surge arrester is installed between LPZ2 and LPZ3, providing an extr...
...phase power distribution and control system, meets SPD level test, used to suppress transient overvoltage lower than equipment withstand shock overvoltage, discharge discharge Energy to protect system circui...
ERICSSON Surge Protection Device, SPD - NFT30459/2...
ERICSSON Surge Protection Device, SPD - NFT30459/2...
...surge protection device designed for final-level equipment lightning protection in AC and DC power systems, suitable for installation in LPZ 2-3 and subsequent lightning protection zones. As a series-install...
... systems, such as TT, TN-S, TN-C, IT, and factory low voltage power and control system. It protects the indirect lightning and direct lightning impact or other transient overvoltage surge, which is mainly ap...
Application: AC/DC distribution; Power supplies; Industrial automation; Telecommunications; Motor controls and starter systems; Programmable logic controller (PLC) applications; Power transfer equipment; HVAC a...
...Surge Protective Device Spd Relay 1. Introduction IM902 is a 90A magnetic latching relay with anti-surge of 3kA and over-voltage/under-voltage protection function. The main advantages are: Max.Switching Curr...
...Surge Protective Device Spd Relay 1. Introduction IM902 is a 90A magnetic latching relay with anti-surge of 3kA and over-voltage/under-voltage protection function. The main advantages are: Max.Switching Curr...