| Sign In | Join Free | My burrillandco.com |
|
IEC62196-1 Charging Interface Breaking Capacity 2Kw Test Device Complied Standards & Clauses Conforms to IEC62196-1:2022., etc. Product Overview It is used to test whether electrical accessories such as electri...
... assembly. Application: Check the mechanical strength of the charging gun cable assembly. Test principle: Use a clamp to fix the sample at a height of 1000mm from the ground and drop it to verify its mechani...
...Test Device Endurance Tester Complied Standards & Clauses Conforms to IEC 62196-3: 2020 clause 22 and 23, IEC62196-1: 2020 clause 22 and clause 23, IEC60309-1: 2012 clause 20 and clause 21, etc. Product Over...
... is mainly limited by the heating effect of the current. i.e. the RMS value. whereas the power amplifier rating is influenced by the peak values. Electrodynamic Vibration Testing Device for Electronic Produc...
... to the test procedures of insulation boots (gloves) and comply with the opinions of the majority of users. The product adopts automatic up (down) voltage, automatically read the leakage ......
... to the test procedures of insulation boots (gloves) and comply with the opinions of the majority of users. The product adopts automatic up (down) voltage, automatically read the leakage ......
... to the test procedures of insulation boots (gloves) and comply with the opinions of the majority of users. The product adopts automatic up (down) voltage, automatically read the leakage ......
... to the test procedures of insulation boots (gloves) and comply with the opinions of the majority of users. The product adopts automatic up (down) voltage, automatically read the leakage ......
... transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control, it also can be tested the constant-velocity loadin...
... is controlled by the high-grade single chip microcomputer (SCM), with the digital display, the no load, short circuit and other test data synchronously also sampled by the SCM. It is avoid separately readin...
...fit for impact test of wire while the latter one is applied for the impact test of plug, socket, switch, wire and electrical conduit. Technical parameters: This device is used with the cryostat. It should be...
Round Single Phase KWH Meter Testing Device, Watt-hour Meter Testing Equipment Description YM-S6100 Round Single Phase Watt-hour Meter Testing Device Adopts internationally advanced new-generation digital power...
... Radiation Testing Device for Floor Construction Products According To EN ISO 9239-1 Introduction: RFP Thermal Radiation Testing Device is the cornerstone of the flooring materials reaction to fire tests in ...
... vibration simulation in lab, no matter generated by natural or man-made vibration environment; such as waves, tidal flaps, wind, earthquake or rain and so on. It is to test if the product is capable of sust...
ISO 3795 Flammability Testing Equipment for Motor Accessories Safety Product introduction: Automotive interior accessories burning test device is based on the federal motor vehicle safety standards 302 in Europ...
... of AC contactors. Standards: - GB14048.4 - GB/T14048.1 - IEC60947-4-1-2000 - IEC60947-1-1999 Technical parameters: 1. Can conduct electrical life test on single-phase ac contactor contacts; 2. 5 station wor...
...Test Device Application: The equipment is used to test the action characteristics of AC contactors and detect the overrun, synchronization error, total stroke, current and voltage of AC contactors. Standards...
...: 3 Phase Protection Relay Testing Device is applied to test the relay unit in relay protection system. At the same time it could be considered as a universal three phase AC/DC voltage source or current sour...
Solid State Battery Testing Device Solid-State Battery Technology Battery Testing Equipment Battery Tester Feature: 1. The German Gehl peek kit, including the insulating pressure piece, also uses peek. 2. Doubl...
...throat swab specimens from symptomatic patients to aid in the diagnosis of group A streptococcal infections. All negative test results should be confirmed by bacterial culture because A negative result does ...