SINO Multifunctional 3-Coordinate Digital Readout SDS6-3V 3-Axis
DRO System Counter
The SDS6-3V digital readout uses the most recent 16 bit SCM
technology and can replace all types of SDS2 series basic functions
as well as any specific necessary functions.
The contron system is simpler and more streamlined, and measurement
speed has increased.
Each axis can supply 40 point of non-linear compensations.
Improved Functions of SINO Opitical Sensor
- EDM functions: Combine with two kinds of EDM processing function of
common DRO SDS2 and it can be set flexible.
- Lathe's axes-accumulative sampling function: We can choose to
display the accumulative value of the axes Y and Z or the
singleness value of each one(Axes Y, Z are correspond to Z, Z0 of
old model SDS2). During this function. users can separate the data
of axes Y by using relecantly buttons in order to observe the
singlenss date of axes Y. In the separation mode, we can set the
value of axes X, Y and Z, it has complete functions for the lathe
requires three axes.
Specifications of SINO SDS6-3V Digital Readout System
Range of supply voltage: AC 80V to 260V; 50Hz to 60Hz, US plug
available
Energy usage: 15 VA
Operating range: 0 to 45 degrees Celsius
Storage range: -30 to 70 degrees Celsius
Square wave TTL/RS422 input signal allowed for readout
Frequency of the allowed input signal: less than 5MHz
Display resolution: 5 m1, 1 m, 5 m, and 1 m
Digital display angle minimum resolution: 0.0001 pulse
Packaging List :
| 1 PC | 3 Axis LED digital readout SDS6-3V |
| 1 PC | Protection cover |
| 1 PC | Instruction Manual (English) |
| 1 PC | Cable |
Product image /photos:
The rack in the picture is optioned, not standard product.
