SINO Economy TFT LCD 2/3 Axis Digital Readout System DRO SDS2-3VA
SDS2-3VA is an economy TFT DRO, is an upgraded verion of SDS2
series. It also employs the newest 16 bits SCM technology and is
allowed to input the high frequency of A/B signals up to 5MHz. That
can be suitable for most of the machine, like the high precision
coordinate boring machine, floor boring machine, grinding machine,
lathe, milling machine and so on. And the plastic case make the
weight ligher for cheaper transportation propose. SDS2-3VA equips a
TFT LCD screen to satisfy more and more different kinds of
requirement.
Strengthen Functions:
- Enlarge the calculator function:
SDS2 series can change the decimal digits to be three, four or five
digits to improve the calculating precision.
- Non-linear error compensation:
The system has maximum 40 sections non-linear error compensation to
improve the machining precision.
- The numbers of decimal digits can be chosen in inch mode:
4 / 5 decimal digits can be chosen in inch mode. 4 digits can
satisfy long scale requirement, and 5 digits can satisfy high
precisions display.
Specifications :
Supply Voltage range: AC 80V~260V; 50~60Hz, US Plug available
Power consumption: 15VA
Operating temperature: 0~45 degrees centigrade
Storage temperature: -30~70 degrees centigrade
Readout allowable input signal: TTL/RS422 square wave
Allowable input signal frequency: Less than 5MHz
Max resolution of digital display length: 0.5µm
Min resolution of digital display angle :0.0001/pulse
Packaging List :
| 1 PC | TFT LCD digital readout SDS2-3VA |
| 1 PC | Transparent cover |
| 1 PC | Instruction Manual (English) |
| 1 PC | Power Cable |
Product image /photos:
The rack in the picture is optioned, not standard product.
