Belt Conveyor Impact Bed With Replacement Low Friction Uhmwpe
Impact Bar/Uhmwpe Impact Strip
We produce impact slide bar for impact beds. Impact beds are used
in the loading area of the conveyor belt to replace the traditional
impact idler.it is designed to reduce shock and stress to the belt
caused by the falling down materials, avoid the abrasion and tear
by sharp materials and prevent materials from falling and
scattering.
Specification of impact bed:
| Type | Belt Speed(m/s) | Drop Height(m) | Particle(mm) | Capacity(t/h) |
| V<4.5 | v≥4.5 | h<3 | h≥3 | k<150 | k≥150 | I<6000 | I≥6000 |
DB-HCC (Light-Duty) | √ | | √ | | √ | | √ | |
DB-ZHCC (Medium-Duty) | | √ | √ | | √ | | | √ |
DB-JHCC (Heavy-Duty Modular) | √ | | | √ | | √ | √ | |
The supporting frame has three types, light-duty support frame,
medium support frame and heavy duty support frame, it is decided by
the loading capacity and drop height.
DB-HCC Light duty impact bed Specification:
| Model | Belt Width | H | A | B | M | θ | D | Impact Bar | Idler Length (mm) |
| Left | Center | Right |
| DB-HCC50×L | 500 | 180 | 740 | 800 | 130 | 30 | 14 | 1 | 2 | 1 | 200 |
| DB-HCC65×L | 650 | 180 | 890 | 950 | 130 | 30 | 14 | 2 | 2 | 2 | 250 |
| DB-HCC80×L | 800 | 200 | 1090 | 1150 | 130 | 35 | 14 | 2 | 3 | 2 | 315 |
| DB-HCC100×L | 1000 | 213 | 1290 | 1350 | 170 | 35 | 18 | 3 | 3 | 3 | 380 |
| DB-HCC120×L | 1200 | 257 | 1540 | 1600 | 200 | 35 | 18 | 3 | 4 | 3 | 465 |
| DB-HCC140×L | 1400 | 265 | 1740 | 1800 | 220 | 35 | 18 | 4 | 5 | 4 | 530 |
| DB-HCC160×L | 1600 | 290 | 1980 | 2050 | 240 | 35 | 20 | 5 | 5 | 5 | 600 |
| DB-HCC180×L | 1800 | 320 | 2180 | 2250 | 240 | 35 | 20 | 5 | 6 | 5 | 670 |
| DB-HCC200×L | 2000 | 350 | 2420 | 2490 | 260 | 35 | 20 | 6 | 6 | 6 | 750 |
DB-HCC Light duty impact bed:
DB-JHCC Medium-duty Impact bed:
DB-JHCC Heavy-duty Impact bed:
About conveyor impact bar:
1. UHMWPE cap + rubber cusion + steel T-slot or Aluminium T-slot
2. high wear resistant, impact resistant, belt supporting, protect conveyor belt,
3. easy installing and replacement.
Features:
1. Using a special UHMW polyethylene surface, so that the
coefficient of friction between the belt and the cushioning strip
to minimize, and good wear resistance.
2. Fine rubber buffer layer is sufficiently effective to absorb the
impact of the whereabouts of the material, greatly reducing the
impact on the conveyor belt when the materials drop, the real point
is to improve the blanking force status.
3. Steel skeleton, aluminium slot, easy to replace.
Specification:
| Item | Size (mm) | Length (mm) |
| Impact Bar Standard 1 | 100*55 | 1220/1400/1500/2010,etc |
| Impact Bar Standard 2 | 100*75 | 1220/1400/1500/2010,etc |
| Impact Bar Heavy Duty | 280*100 | 1080 |
