SINO SDS2MS Digital Readout System DRO Display Two Axis Linear
Scale Encoder System For Milling Machines
Resistance to power supply and signal interference, a durable
button panel, and simple and useful replacement.On the digital
display table, functional operations like sine, cosine, and tangent
can be performed right away.It might be in the X and Y directions
in the case of an automated tool adjustment.
Upgraded Functions:
Linear error correction is one.
The second is nonlinear error correction.
3. Deactivate the memory.
4. The tempo is constant.
Digital DRO 2 Axis Readout Specifications
1. AC voltage range of 50 hz to 60 hz and 85 v to 250 v
2. 25 volts and 15 watts of power were used.
A coordinate, two coordinates, and three coordinates should be used
to represent the number.
4. Exhibit symbols that signed seven displays (two or three axes)
and produced data information using eight meters words.
5. Net Weight: 2.9 pounds/1.3 kilograms
6. The input signal is an EIA-422 open collector output signal and
TTL, a simple interface with a programmable controller.
7.Allow input signals with a frequency of more than 100 KHz.
8. Use the values 10, 5, 2, 1, and 0.5 microns to connect a
resolution.
Packaging List :
| 1 PC | 2 Axis digital readout SDS2MS |
| 1 PC | Transparent cover |
| 1 PC | Instruction Manual (English) |
| 1 PC | Cable |
Product image /photos:
The rack in the picture is optioned, not standard product.
